User Manual

Product Reference Guide 325
Appendix C
Standard Defaults
The most common configuration settings are listed in the “Default” col-
umn of the table below. Page references are also provided for feature
descriptions and programming bar codes for each parameter. A column
has also been provided for recording of your preferred default settings
for these same configurable features.
Table 56. Standard Defaults
Parameter Default Your Setting
Page
Number
GLOBAL INTERFACE FEATURES
Host Commands — Obey/Ignore
Obey 23
USB Suspend Mode
Disable 23
RS-232 ONLY
Baud Rate
115200 26
Data Bits
8 Data Bits 27
Stop Bits
1 Stop Bit 27
Parity
None 28
Handshaking Control
RTS 29
RS-232/USB-Com
Intercharacter Delay
No Delay 31
Beep On ASCII BEL
Disable 31
Beep On Not on File
Enable 32
ACK NAK Options
Disable 32
ACK Character
‘ACK’ 33
NAK Character
‘NAK’ 33
ACK NAK Timeout Value
200 ms 34
ACK NAK Retry Count
3 Retries 34
ACK NAK Error Handling
Ignore Errors Detected 35