PowerScan™ PD8530 Family Industrial Corded Handheld Area Imager Bar Code Reader Quick Reference Guide
Datalogic Scanning, Inc. 959 Terry Street Eugene, Oregon 97402 Telephone: (541) 683-5700 Fax: (541) 345-7140 An Unpublished Work - All rights reserved. No part of the contents of this documentation or the procedures described therein may be reproduced or transmitted in any form or by any means without prior written permission of Datalogic Scanning, Inc. or its subsidiaries or affiliates ("Datalogic" or “Datalogic Scanning”).
Table of Contents Description ..................................................................................................... 3 Using the PowerScan™ PD8530 Family ............................................... 4 Indicators ........................................................................................................ 5 LED Indicators ....................................................................................... 5 Beeper................................................................
NOTES 2 PowerScan™ PD8500 Family
PowerScan™ PD8530 Family Description This manual includes just the commands required for the startup of the scanner and setting of the interface. For complete configuration of the scanner, refer to the PowerScan™ PD8530 Reference Manual or the Datalogic Aladdin configuration program, both downloadable from the website and available on the included CD ROM. The PowerScan™ PD8530 Hand-Held Reader packs a lot of performance into an attractive, rugged, hand-held device.
Using the PowerScan™ PD8530 Family USA Driver License Parsing The reader can be set up to select and output a subset of data elements from USA Driver License PDF417 barcodes. This feature can be enabled using either Datalogic Aladdin™ or the barcodes in the USA Driver License Parsing Quick Reference Guide (QRG), available on the Datalogic website. Using this Quick Reference Manual, you can start using your PowerScan™ PD8530 reader.
Indicators Successful reading is signaled by an audible tone plus a good-read green LED. The PowerScan™ PD8530 hand-held reader aiming system is designed for general reading and decoding of 1D and 2D symbols. Some variation in reading distance will occur due to narrow bar width and other factors. If reading codes positioned on reflective surfaces, it may be necessary to tilt the reader with respect to the barcode and/ or set the Camera Control parameters.
Setup Good Read Spot A green good-read spot will be projected in the field of view when the reading is successful. Setup 1. Make connections between PowerScan™ PD8530 and the Host PC using the correct interface cable. 2. Read the correct Interface Selection code. Your reader is now ready to read codes using the default settings.
Connections Connections Connecting the Cable A. Rubber gasket B. Plastic boot C. Cable spacer D. Cover E. Strain relief 1. Slip the cover over the cable. 2. Push the plastic boot into the rubber gasket. Take care that the tab on the plastic boot is aligned with the notch in the rubber gasket. 3. Push the plastic boot and gasket into the handle. Ensure that the “Front” marking on the plastic boot is facing out, with the arrow pointing towards the front of the scanner. 4.
Connections RS232 Wedge USB The USB interface is compatible with: Windows 98 (and later) IBM POS for Windows Mac OS 8.
Connections Start-Up As with all USB devices, on connection the Host performs several checks by communicating with the PowerScan™ PD8530. During this phase the green LED on the PowerScan™ PD8530 blinks and normal operations are suspended.
Interface Selection Interface Selection RS232 Wedge – IBM AT AMHKHMFOHNGNENEIEPANHOGOCK AGPEPJAMDKEOFMHMLJAKFEHFKK AMGNPJCJGIIJCMCEGJMHNDOLLK AIFBJLBGMHPLNKECPCGMBBIBOK AAPHBAJJDAAGMGKDDAOHBGGLHK AEKFBONJCDDIECLFJIJKMCHLIK DLDDLDLDLLDLLLLDLLDDDLDLLL AMHKHMFOHNGNENEIEPANHOGOCK AGPEPJAMDKEOFMHMLJALFAEHKK AEONPJCJGIIJCMCEHPLLHLPPJK AIFBJLBGMHPLNPDFHGDGFIBDOK AAPHBAJJCGCOPJDIMBCEANODDK AFKFBPPJPJCAALOIKIECIPIKLK DDLDLDLDDLDLLLLDDDDDDLDLDL USB BULK USB KB EMULATION AMHKHMFOHNGNENEIEPANHOGOCK AGPEPJAMDKEOF
Wedge Keyboard Nationality Wedge Keyboard Nationality This parameter default value is restored through the Interface Selection code and not through the Restore Default code. Select one of the following keyboard nationality codes.
USB Keyboard Nationality USB Keyboard Nationality This parameter default value is restored through the Interface Selection code and not through the Restore Default code. Select one of the following keyboard nationality codes.
Reading Parameters Reading Parameters Good Read Spot Duration Disabled Short AMHKHNGMFNGNENEIEPANHOGOCK AGPEPBIMDKEOFMHMLJAKEEGEKK AMGNPJCJGIIJCMCEHMNEPKCDPK AIFBJLBGMHPLNKHNAEHPNLGDOK AAPHBAJIDFDNGNPJFBDBHFOHHK AHLFBOIEEHIOMFIGJFGGIFJKKK DDDDLDLDDDLLLLLDDLDDDLDLLL AMHKHNGMFNGNENEIEPANHOGOCK AGPEPBIMDKEOFMHMLJALEAFGKK AEONPJCJGIIJCMCEGKKIFCDHNK AIFBJLBGMHPLNPAKIACFJCPBOK AAPHBAJICDBFFCGCKAPCGOGPDK AGLFBPKEJNJGIMNLKFLOMIGLJK DLLDLDLDLDLLLLLDLDDDDLDLDL Medium Long AMHKHNGMFNGNENEIEPANHOGOCK AGPEPBIMD
Default Configuration Default Configuration RS232 Standard DEFAULT SETTINGS 115200 baud, no parity, 8 data bits, 1 stop bit, no handshake, no protocol, FIFO enabled, intercharacter delay = 0, intercode delay = 0, serial trigger lock disabled, serial trigger lock disable character = NUL, serial trigger lock enable character = NUL, RX Timeout = 10 sec USB COM Emulation DEFAULT SETTINGS no handshake, no protocol, FIFO enabled, intercharacter delay = 0, intercode delay = 0 USB Keyboard Emulation DEFAULT SETT
Default Configuration ADVANCED FORMATTING PARAMETERS format disabled CAMERA CONTROL exposure mode = automatic, based on entire image POWER SAVE Illumination power = ON CODE SELECTION issue identical codes = enable enabled codes Standard Code 39: no check digit control, variable code length; EAN 8/EAN 13 / UPC A/UPC E without ADD ON: UPCE expansion disabled Code 128: variable code length PDF417 Datamatrix: rectangular, normal and inverted, variable code length QR disabled codes Code 32, Interleaved 2/5, C
Operating Test Operating Test EAN-13 Code 39 (Standard) 1 234567 000992 Code 128 t e s QR 16 1 7 1 6 2 PDF417 t Data Matrix (Normal) PowerScan™ PD8530 Family
Technical Features Technical Features PowerScan™ PD8530 Family Common Features Electrical Features Operating Voltage Power Consumption @ 5V (Typical) @30V (Typical) 5 to 30 V 600 mA 100 mA Communications Features RS-232, Keyboard emulation AT IBM, USB COM emulation, USB Keyboard emulation USB Bulk, USB Generic HID Standard Interfaces Proprietary Interfaces Environmental Features Operating Temperature Storage Temperature Humidity Drop Resistance IP Sealing -10° to +55° C (+14° to +131° F) -20° to +70°
Technical Features PowerScan™ PD8530™ Optical Features Focus distance Field of view Horizontal field of view at distance (d) in mm Vertical field of view at distance (d) in mm Max Resolution 110 mm 39°(H)x25°(V) 0.7d + 24 0.46d + 15 Linear codes - PDF417 - mm Datamatrix – mm (mils) (mils) mm (mils) 0.10 (4) 0.10 (4) 0.17 (6.6) Depth of field* 1D (linear): Code39 X-dimension mm (mils) DOF mm (in) 45 to 75 mm (1.77 to 2.95) 50 to 320 (1.97 to 12.60) 15 to 220 (0.59 to 8.66) DOF mm (in) 30 to 70 mm (1.
Technical Features PowerScan™ PD8530™ HD Optical Features Focus distance Field of view Horizontal field of view at distance (d) in mm Vertical field of view at distance (d) in mm Max Resolution 65 mm 27° (H) x 22° (V) 0.50d + 13 0.40d + 10 Linear codes mm (mils) 0.05 (2 mils) PDF 417 – mm (mils) 0.08 (3 mils) Datamatrix – mm (mils) 0.10 (4 mils) Depth of field* DOF cm (in) Code39 4.5 to 8.0 (1.77 to 3.15) 3.5 to 9.5 (1.38 to 3.74) 6.0 to 18.5 (2.36 to 7.28) EAN13 5.0 to 14 (1.97 to 5.
Technical Features PowerScan™ PD8530™ WA Optical Features Focus distance Field of view Horizontal field of view at distance (d) in mm Vertical field of view at distance (d) in mm Max Resolution 115 mm 54° (H) x 45° (V) 1.04d + 40 0.40d + 10 Linear codes mm (mils) 0.13 (5 mils) PDF 417 – mm (mils) 0.13 (5 mils) Datamatrix – mm (mils) 0.19 (7.5 mils) Depth of field* 1D (linear): Code39 X-dimension mm (mils) DOF cm (in) 2.5 to 10.0 0.13 (5) (0.98 to 3.94) 1.5 to 32 0.51 (20) (0.59 to 12.60) 1.5 to 26.
Services and Support Services and Support Datalogic provides several services as well as technical support through its website. Log on to www.scanning.datalogic.com and click on the links indicated for further information including: Products Search through the links to arrive at your product page where you can download specific Manuals and Software & Utilities including: • Datalogic Aladdin™, a multi-platform utility program that allows device configuration using a PC.
Services and Support If Datalogic determines that a product has defects in material or workmanship, Datalogic shall, at its sole option repair or replace the product without additional charge for parts and labor, or credit or refund the defective products duly returned to Datalogic. To perform repairs, Datalogic may use new or reconditioned parts, components, subassemblies or products that have been tested as meeting applicable specifications for equivalent new material and products.
Services and Support Warranty Exclusions The Datalogic Factory Warranty shall not apply to: (i) any product which has been damaged, modified, altered, repaired or upgraded by other than Datalogic service personnel or its authorized representatives; (ii) any claimed defect, failure or damage which Datalogic determines was caused by faulty operations, improper use, abuse, misuse, wear and tear, negligence, improper storage or use of parts or accessories not approved or supplied by Datalogic; (iii) any claime
Services and Support DATALOGIC'S LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, ORAL OR WRITTEN, STATUTORY OR OTHERWISE, INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NONINFRINGEMENT. DATALOGIC SHALL NOT BE LIABLE FOR ANY DAMAGES SUSTAINED BY CUSTOMER ARISING FROM DELAYS IN THE REPLACEMENT OR REPAIR OF PRODUCTS UNDER THE ABOVE.
Compliance Compliance Aiming System Laser Beam Output Window FCC Compliance Modifications or changes to this equipment without the express written approval of Datalogic could void the authority to use the equipment. This device complies with PART 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference which may cause undesired operation.
Compliance LED Illuminator The use of an illuminator in the PowerScan™ PD8530 hand-held reader is a Class 1 LED product: ILLUMINATORE LED CLASSE 1 AUSLEUCHTER LED KLASSE 1 ILLUMINATEUR A LED DE CLASSE 1 ILUMINADOR LED DE CLASE 1 Aiming System The PowerScan™ PD8530 aiming system meets the Class 2 requirements for laser safety.
Compliance STANDARD LASER SAFETY REGULATIONS This product conforms to the applicable requirements of both CDRH 21 CFR 1040 and EN 60825-1 at the date of manufacture. For installation, use and maintenance, it is not necessary to open the device. Use of controls or adjustments or performance of procedures other than those specified herein may result in exposure to hazardous visible laser light. WARNING The product utilizes a low-power laser diode.
Compliance DEUTSCH Die folgenden Informationen stimmen mit den Sicherheitshinweisen überein, die von internationalen Behörden auferlegt wurden, und sie beziehen sich auf den korrekten Gebrauch vom Terminal. NORM FÜR DIE LASERSICHERHEIT Dies Produkt entspricht am Tag der Herstellung den gültigen EN 608251 und CDRH 21 CFR 1040 Normen für die Lasersicherheit. Es ist nicht notwendig, das Gerät wegen Betrieb oder Installations-, und Wartungs-Arbeiten zu öffnen.
Compliance Le produit utilise une diode laser. Aucun dommage aux yeux humains n’a été constaté à la suite d’une exposition au rayon laser. Eviter de regarder fixement le rayon, comme toute autre source lumineuse intense telle que le soleil. Eviter aussi de diriger le rayon vers les yeux d’un observateur, même à travers des surfaces réfléchissantes (miroirs, par exemple).
Compliance WEEE Compliance Waste Electrical and Electronic Equipment (WEEE) Statement English For information about the disposal of Waste Electrical and Electronic Equipment (WEEE), please refer to the website at www.scanning.datalogic.com. Italian Per informazioni sullo smaltimento delle apparecchiature elettriche ed elettroniche consultare il sito Web www.scanning.datalogic.com.
Compliance NOTES Quick Reference Guide 31
Compliance NOTES 32 PowerScan™ PD8530 Family
Datalogic Scanning, Inc.
Australia Japan Datalogic Scanning Pty Ltd Telephone: [61] (2) 9870 3200 australia.scanning@datalogic.com Datalogic Scanning KK Telephone: 81 (0)3 3491 6761 japan.scanning@datalogic.com France and Benelux Latin America Datalogic Scanning SAS Telephone: [33].01.64.86.71.00 france.scanning@datalogic.com Datalogic Scanning, Inc Telephone: (305) 742-2206 latinamerica.scanning@datalogic.com Germany Singapore Datalogic Scanning GmbH Telephone: 49 (0) 61 51/93 58-0 germany.scanning@datalogic.
