manual

PowerScan® M8500 Configuration
12 PowerScan® M8500
4. Set Time
+
four digits for Hours and Minutes (HHMM).
5. Set Radio Address
+
four digits for the PowerScan
®
M8500 Address
(from 0000 to 1999).
All readers used in the same area must have different addresses.
6. Exit and Save Configuration
7.
Read the Bind code to pair the PowerScan
®
M8500 to the BC-80X0 cradle.
The reader is dedicated to the cradle. Any previously bound reader will be
excluded.
To connect several readers to the same cradle see the following section "Using
Multiple Readers with Same Cradle".
Bind
The green LED on the PowerScan
®
M8500 will blink: the reader is ready to be
positioned onto the cradle.