User's Manual

Marking and European Economic Area (EEA)
In radio systems configured with mobile computers and access points, the frequencies to be used must
be allowed by the spectrum authorities of the specific country in which the installation takes place.
Be absolutely sure that the system frequencies are correctly set to be compliant with the spectrum
requirements of the country.
The Radio modules used in this product automatically adapt to the frequencies set by the system and do
not require any parameter settings.
Simplified EU Declaration of Conformity
Hereby, Datalogic S.r.l. declares that the radio equipment type Memor 20 is in compliance with Directive
2014/53/EU. The full text of the EU declaration of conformity is available at the following internet
address: www.datalogic.com.
The simplified EU declaration of conformity referred to in Article 10(9) shall contain the elements set out
in Annex VII and shall be continuously updated. It shall be translated into the languages required by the
Member State in which the radio equipment is placed or made available on the market. The full text of
the EU declaration of conformity shall be available at the internet address referres to in the simplified EU
delcaration of conformity, in a language or languages required by the Member State in which the radio
equipment is placed or made available on the market.
Statement of compliance
Česky [Czech]
Datalogic S.r.l. tímto prohlašuje, že tento Memor 20 je ve shodě se základními požadavky a dalšími
příslušnými ustanoveními směrnice 2014/53/EU - 2011/65/EU.
Dansk [Danish]
Undertegnede Datalogic S.r.l. erklærer herved, at følgende udstyr Memor 20 overholder de væsentlige
krav og øvrige relevante krav i direktiv 2014/53/EU - 2011/65/EU.
Deutsch [German]
Hiermit erklärt Datalogic S.r.l., dass sich das Gerät Memor 20 in Übereinstimmung mit den grundlegenden
Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie 2014/53/EU - 2011/65/EU
befindet.
Eesti [Estonian]
Käesolevaga kinnitab Datalogic S.r.l. seadme Memor 20 vastavust direktiivi 2014/53/EU - 2011/65/EU
põhinõuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele sätetele.
Español [Spanish]
Por medio de la presente Datalogic S.r.l. declara que el Memor 20 cumple con los requisitos esenciales y
cualesquiera otras disposiciones aplicables o exigibles de la Directiva 2014/53/EU - 2011/65/EU.
Ελληνική [Greek]
ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Datalogic S.r.l. ΔΗΛΩΝΕΙ ΟΤΙ Memor 20 ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ
ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 2014/53/EU - 2011/65/EU.
Français [French]
Par la présente Datalogic S.r.l. déclare que l’appareil Memor 20 est conforme aux exigences essentielles
et aux autres dispositions pertinentes de la directive 2014/53/EU - 2011/65/EU.
Italiano [Italian]
Con la presente Datalogic S.r.l. dichiara che questo Memor 20 è conforme ai requisiti essenziali ed alle
altre disposizioni pertinenti stabilite dalla direttiva 2014/53/EU - 2011/65/EU.
Latviski [Latvian]
Ar šo Datalogic S.r.l. deklarē, ka Memor 20 atbilst Direktīvas 2014/53/EU - 2011/65/EU būtiskajām
prasībām un citiem ar to saistītajiem noteikumiem.
Lietuvių [Lithuanian]
Šiuo Datalogic S.r.l. deklaruoja, kad šis Memor 20 atitinka esminius reikalavimus ir kitas 2014/53/EU -
2011/65/EU Direktyvos nuostatas.
Nederlands [Dutch]
Hierbij verklaart Datalogic S.r.l. dat het toestel Memor 20 in overeenstemming is met de essentiële eisen
en de andere relevante bepalingen van richtlijn 2014/53/EU - 2011/65/EU.
Malti [Maltese]
Hawnhekk, Datalogic S.r.l., jiddikjara li dan Memor 20 jikkonforma mal-ħtiġijiet essenzjali u ma
provvedimenti oħrajn relevanti li hemm fid-Dirrettiva 2014/53/EU - 2011/65/EU.
Magyar [Hungarian]
Alulírott, Datalogic S.r.l. nyilatkozom, hogy a Memor 20 megfelel a vonatkozó alapvetõ követelményeknek
és az 2014/53/EU - 2011/65/EU irányelv egyéb elõírásainak.
Polski [Polish]
Niniejszym Datalogic S.r.l. oświadcza, że Memor 20 jest zgodny z zasadniczymi wymogami oraz
pozostałymi stosownymi postanowieniami Dyrektywy 2014/53/EU - 2011/65/EU.
Português [Portuguese]
Datalogic S.r.l. declara que este Memor 20 está conforme com os requisitos essenciais e outras
disposições da Directiva 2014/53/EU - 2011/65/EU.
Slovensko [Slovenian]
Datalogic S.r.l. izjavlja, da je ta Memor 20 v skladu z bistvenimi zahtevami in ostalimi relevantnimi določili
direktive 2014/53/EU - 2011/65/EU.
Slovensky [Slovak]
Datalogic S.r.l. týmto vyhlasuje, že Memor 20 spĺňa základné požiadavky a všetky príslušné ustanovenia
Smernice 2014/53/EU - 2011/65/EU.
Suomi [Finnish]
Datalogic S.r.l. vakuuttaa täten että Memor 20 tyyppinen laite on direktiivin 2014/53/EU - 2011/65/EU
oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen.
Svenska [Swedish]
Härmed intygar Datalogic S.r.l. att denna Memor 20 står I överensstämmelse med de väsentliga
egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 2014/53/EU - 2011/65/EU.
Radio Technologies and Frequency Bands
Function Frequency Maximum Output Power
WI-FI
2400 – 2483.5 MHz < 20 dBm EIRP (100 mW)
5150 – 5350 MHz < 23 dBm EIRP (200 mW)
5470 – 5725MHz < 30 dBm EIRP (1000 mW)
5725 – 5850MHz < 13.98 dBm EIRP (25mW)
Bluetooth
2400 – 2483.5 MHz < 10 dBm EIRP (10 mW)
RFID/NFC
13.56 MHz < 42 dBuA/m@10m
This device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range.
AT BE BG HR CY CZ DK
EE FI FR DE EL HU IE
IT LV LT LU MT NL PL
PT RO SK SI ES SE UK
IS LI NO CH TR
This device has been tested and found to comply with the limits pursuant to EN 303 417. These
limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to other electronic equipments, which can be
determined by turning the equipment OFF and ON, the user is encouraged to try to correct the
interference by one or more following measures:
 Reorient or relocate the equipment
 Increase the separation
Don't place some metal things between the TX surface and the RX surface, Otherwise the metal
things will be heated,and therefore the temperature might get high.
CAUTION
FCC Compliance
FCC Interference Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This device has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiated radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the
user‘s authority to operate the equipment.
The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other
channels is not possible.
Federal Communication Commission (FCC) Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
End user must follow the specific operating instructions for satisfying RF exposure compliance.
Industry Canada Compliance
IC Statement
This Class B digital apparatus complies with Canadian ICES-003.
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science
and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two
conditions:
1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation
of the device.
The products are compliant with SAR for general population/uncontrolled exposure limits in IC RSS-102
and has been tested in accordance with the measurement methods and procedures specified in IEEE
1528. Maintain at least 20mm distance for body-warn condition.
The transmitter module may not be co-located with any other transmitter or antenna.
CAN ICES-3 (B)/NMB-3(B)
Pour les produits disponibles aux États-Unis / Canada du marché, seul le canal 1 à 11 peuvent être
exploités. Sélection d'autres canaux n'est pas possible.
The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential
for harmful interference to co-channel mobile satellite systems.
CAUTION
SAR Compliance
SAR Information (for European Union)
Head:0.114 W/kg@10g (CE);
Body: 0.470W/kg@10g (CE);
RF Exposure Information and Statement
This device was tested for hand-held and body-worn conditions, according to international Standards
covering human exposure to electromagnetic fields from radio devices. The SAR limit of EU (CE is 2.0 W/
kg for trunk/head as averaged over any 10g tissue according to the EN 50360:2017 and EN 50566:2017.
Memor 20 has also been tested against this SAR limit. The highest SAR value reported under this
standard during product certification for use at the ear is D.514W/kg and when properly worn on the body
is 1.461 W/kg. This device was tested for typical body-worn operations. A minimum separation distance
must be maintained between the user's body and the handset, including the antenna: m to comply with
the RF exposure requirements in Europe Third-party belt-clips,holsters and similar accessories used by
this device should not contain any metallic components. Body-worn accessories that do not meet these
requirements may not comply with RF exposure requirements and should be avoided.
FCC SAR values
Head: 0.56 w/kg@1g
Body -Worn: 1.09W/kg@1g
Hand: 2.06W/Kg@10g
Body-worn Operation
This device has been tested and meets applicable limits for Radio Frequency (RF) exposure. Specific
Absorption Rate (SAR) refers to the rate at which the body absorbs RF energy. SAR limits are 1.6 Watts
per kilogram (over a volume containing a mass of 1 gram of tissue) in countries that follow the United
States FCC limit and 2.0 W/kg (averaged over 10 grams of tissue) in countries that follow the Council of
the European Union limit. Tests for SAR are conducted using standard operating positions with the device
transmitting at its highest certified power level in all tested frequency bands.
To reduce exposure to RF energy, use a hands-free accessory or other similar option to keep this device
away from your head and body. Carry this device at least 10 mm away from your body to ensure exposure
levels remain at or below the as-tested levels. Choose the belt clips, holsters, or other similar body-worn
accessories which do not contain metallic components to support operation in this manner. Cases with
metal parts may change the RF performance of the device, including its compliance with RF exposure
guidelines, in a manner that has not been tested or certified, and use such accessories should be avoided.