Installation manual

INSTALLATION
29
3
3.2.3 Mounting a GFC-2100 Accessory Lateral Output Deflection Mirror
The GFC-2100 accessory is a 90° Lateral Output deflection mirror which helps to position the
scanner body in a different orientation with respect to the code, for limited space applications.
The following items in the kit are used for
mounting:
Deflection Mirror bag 1
Fixing Screws in bag 2
(silver self-threading)
90° Scanning Window in bag 2
0° Scanning Window
(original scanner part)
90° Scanning Window
Figure 18 - 0° vs 90° Scanning Windows
1. Make sure the device is not powered.
2. Remove the original 0° scanning
window from the scanner by
unscrewing the two cover screws.
Cover Screws
Figure 19 - Removing the 0° Scanning Window
CAUTION
Avoid any contact with the deflection mirror, mirrored rotor, the lenses or
other optical components; otherwise the performance of the reader will be
reduced.
3. Fix the mirror (from bag 1) to the
device by means of the two fixing
screws (from bag 2).
4. Clean the mirror surface and reading
window with a clean soft cloth and
alcohol before closing the scanner.
Self-Threading Fixing Screws
Deflection Mirror
Unthreaded
Holes
Figure 20 - Mounting Deflection Mirror
5. Mount the 90° scanning window
(from bag 2) so that the opening face
is now at 90° with respect to the
scanner body. Tighten the two cover
screws.
Figure 21 - Mounting 90° Scanning Window
The reading position with respect to the
scanner is shown here.
Laser Beam
90° ± 2°
GFC-2100
Figure 22 - GFC-2100 Laser Beam Output Position
Phone: [phone] - Fax: [phone] - Web: www.ctiautomation.net - Email: [e-mail]