Installation manual

DS2400N REFERENCE MANUAL
86
7
The decoder will be able to read the label with a tilt angle between
+ max and - max as shown in the following figure:
Conveyor
Laser Beam
No Read
No Read
-
+
0°
OK
OK
OK
OK
OK
No Read
Figure 104 – Reading Zones with Max
NOTE
While tilt angles of 45° can be obtained, DS2400N scanners are not
designed to create omni-directional reading stations using two scanners in
an X-pattern.
Phone: [phone] - Fax: [phone] - Web: www.ctiautomation.net - Email: [e-mail]