Product specifications

Symbologies

100 QuickScan

QS6500/QS6500BT

EAN-13 — continued

ISBN ID Setting

Sets the Code ID used for labels that are translated to ISBN/ISSN numbers.

The Code I.D. for this symbology consists of one or two user-selectable ASCII

characters. It can be appended previous to or following the transmitted bar code

data depending on how this feature is enabled.

Example: Setting the ISBN ID

To configure this feature:

1. Determine which character(s) you would like to use to represent ISBN/

ISSN translated labels. Reference

Appendix A, ASCII Conversion Chart, to

find the corresponding hex values for your chosen character(s). In this

example we’ll set a Code I.D. of “I” to represent ISBN/ISSN. The value

from the table corresponding to ‘I’ is 49. This value will be used in a step

to follow.

2. Scan the START bar code

3. Scan the SET ISBN CODE I.D. bar code.

4. Turn to

Appendix B, Alpha-Numeric Pad and scan the bar codes ‘4’ and ‘9’

(the value 49 determined in an earlier step to represent a Code I.D. of ‘I’).

5. Scan the SET bar code to accept the digits scanned.

6. Turn to the

Data Editing chapter and scan the CODE ID POSITION:

BEFORE BAR CODE DATA label.

7. Scan the END bar code to exit Programming Mode.

8. The resulting message string for converted ISBN/ISSN labels would

appear as follows:

Scanned bar code data: 97801234565

Resulting message string output: I97801234565

NOTE

Features configured using the

Data Editing chapter are

universal and will affect all symbologies.