Product specifications

Symbologies
Product Reference Guide 3
Symbologies
In addition to standard linear bar code symbologies, the PDF model of the lin-
ear imager also reads 2-Dimensional stacked bar code symbologies such as
PDF417, Micro PDF 417 and EAN UCC Composite.
For more information plus a complete listing of available symbology types,
turn to the
Symbologies chapter of this manual.
Linear Imager Settings
The linear imager is factory programmed for the most common terminal and
communications settings. If you need to change these settings, programming is
accomplished by scanning the bar codes in this guide.
In the programming chapters, factory default settings are indicated with bold
text and yellow highlighting. These defaults represent the settings for the RS-
232 standard interface. For a listing of defaults for other interfaces, reference
Chapter D, Default Settings, in the section titled Interface Default Exceptions.
Return to Factory Defaults
Scan the two bar codes below to reset the imager (handheld) and Base Station
to factory settings. These bar codes can be used to return the imager to a
“known” working state when the present programming status is not known,
faulty, or suspect.
Return handheld to
factory defaults
Return Base Station to
factory defaults