Product specifications

RSS Limited
Product Reference Guide 137
RSS Limited — continued
Code I.D. Selection
The Code I.D. for this symbology consists of one or two user-selectable ASCII
characters. It can be appended previous to or following the transmitted RSS
Limited bar code data depending on how this feature is enabled.
Example: Setting the RSS Limited Code I.D.
To configure this feature:
1. Determine which character(s) you would like to use to represent the RSS
Limited symbology. Reference
Appendix A, ASCII Conversion Chart to find
the corresponding hex values for your chosen character(s). In this exam-
ple we’ll set a Code I.D. of “RL” to represent RSS Limited. The value
from the table corresponding to ‘’R’ is 52 and the value for ‘L’ is 4C.
These values will be used in a step to follow.
2. Scan the START bar code
3. Scan the SET RSS Limited CODE I.D. bar code.
4. Turn to
Appendix B, Alpha-Numeric Pad and scan the bar codes ‘5’ and ‘2’
(the value determined in an earlier step to represent ‘R’). Then scan the
bar codes ‘4’ and ‘C’ (hex equivalent for ‘L’).
5. Scan the SET bar code to accept the digits scanned.
6. Turn to the
Data Editing chapter and scan the CODE ID POSITION:
BEFORE BAR CODE DATA label.
7. Scan the END bar code to exit Programming Mode.
8. The resulting message string for scanned RSS Limited labels would
appear as follows:
Scanned bar code data: 0123456789123
Resulting message string output: RL0123456789123
NOTE
Features configured using the
Data Editing chapter are
universal and will affect all symbologies.