Product specifications

Symbologies

238 QuickScan

QS6500/QS6500BT

Telepen — continued

Code I.D. Selection

The Code I.D. for this symbology consists of one or two user-selectable ASCII

characters. It can be appended previous to or following the transmitted Telepen

bar code data depending on how this feature is enabled.

Example: Setting the Telepen Code I.D.

To configure this feature:

1. Determine which character(s) you would like to use to represent the

Telepen symbology. Reference

Appendix A, ASCII Conversion Chart to find

the corresponding hex values for your chosen character(s). In this example

we’ll set a Code I.D. of “S” to represent Telepen. The value from the table

corresponding to ‘’S’ is 53. This value will be used in a step to follow.

2. Scan the START bar code

3. Scan the SET TELEPEN CODE I.D. bar code.

4. Turn to

Appendix B, Alpha-Numeric Pad and scan the bar codes ‘5’ and ‘3’

(the value determined in an earlier step to represent ‘S’).

5. Scan the SET bar code to accept the digits scanned.

6. Turn to the

Data Editing chapter and scan the CODE ID POSITION:

BEFORE BAR CODE DATA label.

7. Scan the END bar code to exit Programming Mode.

8. The resulting message string for scanned Telepen labels would appear as

follows:

Scanned bar code data: 0123456789123

Resulting message string output: S0123456789123

NOTE

Features configured using the

Data Editing chapter are

universal and will affect all symbologies.