Product specifications

Symbologies

246 QuickScan

QS6500/QS6500BT

Standard 2 of 5 — continued

Code I.D. Selection

The Code I.D. for this symbology consists of one or two user-selectable ASCII

characters. It can be appended previous to or following the transmitted Stan-

dard 2 of 5 bar code data depending on how this feature is enabled.

Example: Setting the Standard 2 of 5 Code I.D.

To configure this feature:

1. Determine which character(s) you would like to use to represent the Stan-

dard 2 of 5 symbology. Reference

Appendix A, ASCII Conversion Chart to

find the corresponding hex values for your chosen character(s). In this

example we’ll set a Code I.D. of “S” to represent Standard 2 of 5. The

value from the table corresponding to ‘’S’ is 53. This value will be used in

a step to follow.

2. Scan the START bar code

3. Scan the SET STANDARD 2 OF 5 CODE I.D. bar code.

4. Turn to

Appendix B, Alpha-Numeric Pad and scan the bar codes ‘5’ and ‘3’

(the value determined in an earlier step to represent ‘S’).

5. Scan the SET bar code to accept the digits scanned.

6. Turn to the

Data Editing chapter and scan the CODE ID POSITION:

BEFORE BAR CODE DATA label.

7. Scan the END bar code to exit Programming Mode.

8. The resulting message string for scanned Standard 2 of 5 labels would

appear as follows:

Scanned bar code data: 0123456789123

Resulting message string output: S0123456789123

NOTE

Features configured using the

Data Editing chapter are

universal and will affect all symbologies.