Product specifications

Symbologies

252 QuickScan

QS6500/QS6500BT

Code 16K — continued

Code I.D. Selection

The Code I.D. for this symbology consists of one or two user-selectable ASCII

characters. It can be appended previous to or following the transmitted Code

16K bar code data depending on how this feature is enabled.

Example: Setting the Code 16K Code I.D.

To configure this feature:

1. Determine which character(s) you would like to use to represent the Code

16K symbology. Reference

Appendix A, ASCII Conversion Chart to find the

corresponding hex values for your chosen character(s). In this example

we’ll set a Code I.D. of “C” to represent Code 16K. The value from the

table corresponding to ‘’C’ is 43. This value will be used in a step to fol-

low.

2. Scan the START bar code

3. Scan the SET Code 16K CODE I.D. bar code.

4. Turn to

Appendix B, Alpha-Numeric Pad and scan the bar codes ‘4’ and ‘3’

(the value determined in an earlier step to represent ‘C’).

5. Scan the SET bar code to accept the digits scanned.

6. Turn to the

Data Editing chapter and scan the CODE ID POSITION:

BEFORE BAR CODE DATA label.

7. Scan the END bar code to exit Programming Mode.

8. The resulting message string for scanned Code 16K labels would appear

as follows:

Scanned bar code data: 0123456789123

Resulting message string output: C0123456789123

NOTE

Features configured using the

Data Editing chapter are

universal and will affect all symbologies.