Product specifications

China Post
Product Reference Guide 259
China Post — continued
Code I.D. Selection
The Code I.D. for this symbology consists of one or two user-selectable ASCII
characters. It can be appended previous to or following the transmitted China
Post bar code data depending on how this feature is enabled.
Example: Setting the China Post Code I.D.
To configure this feature:
1. Determine which character(s) you would like to use to represent the
China Post symbology. Reference
Appendix A, ASCII Conversion Chart to
find the corresponding hex values for your chosen character(s). In this
example we’ll set a Code I.D. of “t” to represent China Post. The value
from the table corresponding to ‘’t’ is 74. This value will be used in a step
to follow.
2. Scan the START bar code
3. Scan the SET CHINA POST CODE I.D. bar code.
4. Turn to
Appendix B, Alpha-Numeric Pad and scan the bar codes ‘7’ and ‘4’
(the value determined in an earlier step to represent ‘t’).
5. Scan the SET bar code to accept the digits scanned.
6. Turn to the
Data Editing chapter and scan the CODE ID POSITION:
BEFORE BAR CODE DATA label.
7. Scan the END bar code to exit Programming Mode.
8. The resulting message string for scanned China Post labels would appear
as follows:
Scanned bar code data: 0123456789123
Resulting message string output: t0123456789123
NOTE
Features configured using the
Data Editing chapter are
universal and will affect all symbologies.