Product specifications

Product Reference Guide 287
Chapter 7
Bluetooth Features
Features in this section are applicable only to Bluetooth (BT) models.
The Bluetooth model includes an imager and Base Station. When the imager
and Base Station are linked together, the imager will read and decode bar codes
and transmit them via a Bluetooth radio to the Base Station. The Base Station
will then transmit the bar code data to the POS host system over the host cable.
The host interfaces available from the Base Station are the same set as the
corded version of the product.
Auto Update
When this feature is enabled, an imager and its linked Base Station can automatically ensure
they stay in sync with regard to application hardware and/or configuration. This is accom-
plished by the linked imager and Base Station comparing application version number and
configuration file check sum. If either is different, the Base Station will automatically update
the imager with its application/configuration.
If the units are linked, any changes made to the Base Station configuration through the scan
utility software will automatically be sent to the imager at the completion of the programming
session. By the same token, any changes made to the linked imager’s configuration will be
transmitted to the Base Station at the end of the programming session.
The following options are available for Auto Update:
• Auto update enable — Allows both application and configuration updat-
ing.
• Configure auto update enable — Allows only configuration updating.
• Application auto update enable — Allows only application updating
• Auto update disable — No automatic updates will be performed.