Product specifications

Interface Features
Product Reference Guide 37
RS-232 Interface Features — cont.
Hardware Flow Control
Disable Hardware Control — The imager transmits to the host regardless of any
activity on the CTS line.
Enable CTS Flow Control — The CTS signal controls transmission of data to the
host.
Enable CTS Scan Control — The CTS line must be active for the imager to read
and transmit data. While the CTS line is inactive, the imager remains in a host-
disabled state; following a successful label transmission, the CTS signal must
transition to inactive and then to active to enable scanning for the next label.
Intercharacter Delay
This delay is inserted after each data character transmitted. If the transmission
speed is too high, the system may not be able to receive all characters. You may
need to adjust the delay to make the system work properly.
Software Flow Control
Disables/Enables software control using XON/XOFF characters.
RS-232 Interface Features — cont.
START
STATE BARCODE
Disable
Hardware
Control
Enable CTS
Flow Control
Enable CTS
Scan Control