User`s manual

153
Composite
Defaults
Scanner
Type
Code
Parameter
Description
I.D.#
Accept.
Input
Min
Max
Factory
2D Imager
Enter 1 for On and 0 for Off
Composite
Enable
Enables/disables the
Composite symbology.
0A10 On or Off Off On Off √
Composite to
GS1-128
Instructs the decoder to
transmit the label data as
one or more GS1-128
labels.
0A14 On or Off Off Off Off √
Composite
Minimum
Set the minimum bar code
label length to be less than
or equal to maximum label
length.
0A28 1-2435 1 1 1 √
Composite
Maximum
This feature specifies the
maximum allowable length
of a label. The length
includes check and data
characters, if applicable.
Maximum Label Length
should be greater than or
equal to Minimum Label
Length.
0A29 1-2435 1 2435 2435 √
Composite
User ID
Specifies the symbology
identifier (if any) that is
sent when parameter Send
Code ID (Index 0025) is
set to 3. ASCII code zero
(null) is used to indicate
that an identifier is not to
be sent for the symbology.
0A2B
Any
single
ASCII
character
(00 = Off)
‘b’ ‘b’ ‘b’ √
NOTE:
For the 2D Imager, GS1 DataBar Expanded’s User ID is used for Composite when User
ID is selected as the symbology ID.