Skorpio™/Skorpio-GUNTM www.mobile.datalogic.com World wide Sales Network available from: www.mobile.datalogic.com/contacts Datalogic Mobile S.r.l. Via S. Vitalino, 13 40012 Lippo di Calderara di Reno Bologna - Italy Telephone: (+39) 051-3147011 Fax: (+39) 051-3147561 ©2006-2009 Datalogic Mobile S.r.l. 822000688 (Rev.
Datalogic Mobile S.r.l. Via S. Vitalino 13 40012 - Lippo di Calderara di Reno Bologna - Italy Datalogic Skorpio™ and Skorpio-GUN™ - User's Manual Software Version: 4.00 Ed.: 12/2009 © 2006-2009 Datalogic Mobile S.r.l. • All rights reserved. • Protected to the fullest extent under U.S. and international laws. • Copying, or altering of this document is prohibited without express written consent from Datalogic Mobile S.r.l. Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A.
CONTENTS REFERENCES ............................................................................................. v Conventions .................................................................................................. v Reference Documentation ............................................................................ v Services and Support.................................................................................... v SAFETY REGULATIONS.......................................................
3.2 3.3 3.4 3.4.1 3.5 3.5.1 3.5.2 3.5.3 3.6 3.6.1 3.6.2 3.7 3.7.1 3.7.2 3.8 3.8.1 3.8.2 3.8.3 3.8.4 3.8.5 3.8.6 3.9 3.9.1 3.9.2 3.9.3 3.9.4 3.10 3.11 Windows Mobile Welcome Wizard.............................................................. 24 Using the Stylus .......................................................................................... 25 Data Capture............................................................................................... 26 Laser Data Capture..........................
REFERENCES CONVENTIONS This manual uses the following conventions: If not otherwise specified, the term Datalogic Skorpio™ refers to both Datalogic Skorpio™ and Skorpio-GUN™ mobile computers. “User” refers to anyone using a Datalogic Skorpio™ mobile computer. “Mobile computer” refers to Datalogic Skorpio™ mobile computer. “You” refers to the System Administrator or Technical Support person using this manual to install, configure, operate, maintain or troubleshoot a Datalogic Skorpio™ mobile computer.
SAFETY REGULATIONS NOTE Read this manual carefully before performing any type of connection to the Datalogic Skorpio™ mobile computer. The user is responsible for any damages caused by incorrect use of the equipment or by inobservance of the indication supplied in this manual. GENERAL SAFETY RULES − Use only the components supplied by the manufacturer for the specific Datalogic Skorpio™ being used.
POWER SUPPLY This device is intended to be supplied by a UL Listed/CSA Certified Power Unit marked "Class 2" or LPS power source rated 5 V DC, minimum 2 A which supplies power directly to the Mini USB connector. LASER SAFETY The laser light is visible to the human eye and is emitted from the window indicated in the figure.
Datalogic Skorpio-GUN™ Models Laser Output Window I D F E La luce laser è visibile all'occhio umano e viene emessa dalla finestra indicata nella figura. Die Laserstrahlung ist für das menschliche Auge sichtbar und wird am Strahlaustrittsfenster ausgesendet (siehe Bild). Le rayon laser est visible à l'oeil nu et il est émis par la fenêtre désignée sur l'illustration dans la figure. La luz láser es visible al ojo humano y es emitida por la ventana indicada en la figura.
ENGLISH The following information is provided to comply with the rules imposed by international authorities and refers to the correct use of your mobile computer. STANDARD LASER SAFETY REGULATIONS This product conforms to the applicable requirements of both CDRH 21 CFR 1040 Subchapter J and EN 60825-1:2001 at the date of manufacture. For installation, use and maintenance, it is not necessary to open the device. Do not attempt to open or otherwise service any components in the optics cavity.
Non tentare di accedere allo scomparto contenete i componenti ottici o di farne la manutenzione. CAUTION L’apertura dello scomparto, o la manutenzione di qualsiasi parte ottica da parte di personale non autorizzato, potrebbe violare le norme della sicurezza. Il sistema ottico può essere riparato solamente alla fabbrica. L'utilizzo di procedure o regolazioni differenti da quelle descritte nella documentazione può provocare un'esposizione pericolosa a luce laser visibile.
CAUTION Unter keinen Umständen darf versucht werden, die Komponenten im Optikhohlraum zu öffnen oder auf irgendwelche andere Weise zu warten. Das Öffnen bzw. Warten der Komponenten im Optikhohlraum durch unbefugtes Personal verstößt gegen die Laser-Sicherheitsbestimmungen. Das Optiksystem darf nur werkseitig repariert werden. Jegliche Änderungen am Gerät sowie Vorgehensweisen, die nicht in dieser Betriebsanleitung beschrieben werden, können ein gefährliches Laserlicht verursachen.
L'utilisation de procédures ou réglages différents de ceux donnés ici peut entraîner une dangereuse exposition à lumière laser visible. CAUTION Le produit utilise une diode laser. Aucun dommage aux yeux humains n’a été constaté à la suite d’une exposition au rayon laser. Eviter de regarder fixement le rayon, comme toute autre source lumineuse intense telle que le soleil. Eviter aussi de diriger le rayon vers les yeux d’un observateur, même à travers des surfaces réfléchissantes (miroirs, par exemple).
El aparato utiliza un diodo láser a baja potencia. No son notorios daños a los ojos humanos a consecuencia de una exposición de corta duración. Eviten de mirar fijo el rayo láser así como evitarían cualquiera otra fuente de luminosidad intensa, por ejemplo el sol. Además, eviten de dirigir el rayo láser hacia los ojos de un observador, también a través de superficies reflectantes como los espejos. El uso de sistemas ópticos con el escáner aumentará el riesgo de daños oculares.
Information for the User ENGLISH Contact the competent authority responsible for the management of radio frequency devices of your country to verify any possible restrictions or licenses required. Refer to the web site http://europa.eu.int/comm/enterprise/rtte/spectr.htm for further information. ITALIANO Contatta l'autorità competente per la gestione degli apparati a radio frequenza del tuo paese, per verificare eventuali restrizioni o licenze.
FCC COMPLIANCE Modifications or changes to this equipment without the expressed written approval of Datalogic could void the authority to use the equipment. This device has been tested and found to comply with the limits for a CLASS A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
PATENTS This product is covered by one or more of the following patents: U.S. patents Nos: 5,992,740; 6,808,114 B1; 6,997,385 B2; 7,387,246 B2. European patents Nos: 681,257 B1; 789,315 B1; 1,128,315 B1; 1,396,811 B1; 1,413,971 B1 Additional patents pending. WEEE COMPLIANCE Informazione degli utenti ai sensi della Direttiva Europea 2002/96/EC L’apparecchiatura che riporta il simbolo del bidone barrato deve essere smaltita, alla fine della sua vita utile, separatamente dai rifiuti urbani.
For more detailed information about disposal, contact the supplier that provided you with the product in question or consult the dedicated section at the website www.mobile.datalogic.com. Information aux utilisateurs concernant la Directive Européenne 2002/96/EC Au terme de sa vie utile, le produit qui porte le symbole d'un caisson à ordures barré ne doit pas être éliminé avec les déchets urbains.
GENERAL VIEW Datalogic Skorpio™ Models B C D H A I J E F K G A) B) C) D) Transflective display User programmable LED Speaker Charging status and battery low warning LED E) Scan key F) G) H) I) J) Keyboard Microphone Laser safety label Product label Adjustable elastic strap with stylus holders K) Battery pack M N L L) Data Capture/Laser Output Window M) Mini USB connector xviii N) RS232/USB Communication /Charger pins
Datalogic Skorpio-GUN™ Models A H E I J F K G A) B) C) D) Transflective display User programmable LED Speaker Charging status and battery low warning LED E) Scan key L L) Mini USB connector F) G) H) I) J) K) Keyboard Microphone Battery pack Laser safety label Data Capture/Laser Output Window Trigger Scan Key M M) RS232/USB Communication /Charger pins xix
xx
INTRODUCTION 1 1 INTRODUCTION 1.1 1.1.1 DATALOGIC SKORPIO™ DESCRIPTION Datalogic Skorpio™ Datalogic Skorpio™ is a rugged mobile computer particularly suitable for mobile commerce solutions in the retail environment, both on store shelves and in the stock room.
DATALOGIC SKORPIO™/ SKORPIO-GUN™ 1 Datalogic Skorpio™ offers retailers the best mobile commerce solution to gain the greatest benefit in the least time for those “selling and serving on the move”! 1.1.2 Datalogic Skorpio-GUN™ Datalogic Skorpio-GUN™ is a compact, lightweight and robust pistol grip mobile computer, particularly suitable for warehousing solutions and bar code scanning intensive applications, especially in the retail environment.
INTRODUCTION 1 Datalogic Skorpio-GUN™ responds to market needs for a device with a pistol grip, which is light and well balanced, compact and robust, with the latest generation of hardware and software and wireless communication. 1.2 AVAILABLE MODELS The brand new Datalogic Skorpio™ is available in different models depending on the options it is equipped with. Options are listed below: • • communication options: IEEE 802.
1 DATALOGIC SKORPIO™/ SKORPIO-GUN™ Remove all the components from their packaging; check their integrity and congruity with the packing documents. Keep the original packaging for use when sending products to the technical assistance center. Damage caused by improper packaging is not covered under the warranty. CAUTION Rechargeable battery packs are not initially charged. Therefore the first operation to perform is to charge them. See paragraph 4.1.
INTRODUCTION 1.4 1 INSERTING MINI SD CARD Datalogic Skorpio™ provides the possibility to add a mini storage disk to increase the on-board memory capacity. To access the Mini SD card slot and to insert the card, proceed as follows: 1a. Turn off the Datalogic Skorpio™ and remove the battery pack, by turning its lock screw to the open position (horizontal) and pulling the lock runner up. 1b. Turn off the Datalogic Skorpio-GUN™ and remove the battery pack, by pulling the battery latch down.
DATALOGIC SKORPIO™/ SKORPIO-GUN™ 1 2. Remove the Mini SD card slot’s protective rubber cover. 3. Insert the card with the written part upward (as shown in the figure) and push it in, aided by the stylus, until it clicks into place. To recognize the card simply turn off and turn on the Datalogic Skorpio™. See par. 3.5. To remove the Mini SD card, just push it toward the inside, aided by the stylus, until it clicks; a spring system will return it out.
INTRODUCTION 1.5 1 USING THE BELT CLIP To use the belt clip (in Datalogic Skorpio™ models only), proceed as follows: 1. Remove the elastic strap and unscrew the strap pivot. 2. Screw the belt clip pivot on the terminal by using the fixing screw.
1 DATALOGIC SKORPIO™/ SKORPIO-GUN™ 3. Insert the terminal in the belt clip by sliding the belt clip pivot into the belt clip until it clicks into place. 4. To release the terminal, press the belt clip unlock button.
INTRODUCTION 1.6 1 STYLUS HOLDER The Stylus holder is located in the handle of the Datalogic Skorpio-GUN™ models only: 1.
DATALOGIC SKORPIO™/ SKORPIO-GUN™ 1 1.
INTRODUCTION 1.9 1 OPERATING SYSTEM Datalogic Skorpio™ comes in two different models, respectively supporting Windows CE and Windows Mobile. For further information regarding Windows Mobile refer to the website: http://www.microsoft.com/windowsmobile.
DATALOGIC SKORPIO™/ SKORPIO-GUN™ 2 2 2.1 CONNECTIONS USB CONNECTION You can use a standard mini USB cable to connect the Datalogic Skorpio™ to a host computer to transfer data. A B C Key: A Host computer B Datalogic Skorpio™ CAUTION C 94A051016 (Standard Mini USB cable) The application of an ESD near the communication/charger pins during the USB active sync connection to an host system could result in an interruption of the link.
CONNECTIONS 2 A B C D Key: A Host computer C B 94A051017 CAB-381 USB type A-B Straight Cable D Datalogic Skorpio™ Single Cradle Desk/ Datalogic Skorpio™ SIngle Cradle Ethernet Power Supply* * Recommended Power Supply: FPS18 AC/DC Power Supply (94ACC4595). 2.2 CONNECTION TO USB PERIPHERALS You can use a standard A (4 pin female) to mini A (5 pin male) USB cable to connect the Datalogic Skorpio™ to a keyboard or a memory. For all these devices maximum current withdrawal must be below 100mA.
DATALOGIC SKORPIO™/ SKORPIO-GUN™ 2 A B C Key: A Memory with USB interface C 94A051024 (Standard A to Mini A USB cable) B Datalogic Skorpio™ Datalogic Skorpio™ works with most of mentioned USB peripherals. In any case, we can’t guarantee good operations with all devices available on market place. NOTE 2.
CONNECTIONS 2 Key: A) Host computer B) 94A054000 9-pin serial cable C) Datalogic Skorpio™ Single Cradle Desk or Datalogic Skorpio Single Cradle Modem or Datalogic Skorpio/F-Color Multiple Cradle D) Power Supply* * Recommended Power Supply: FPS18 AC/DC Power Supply (94ACC4595). CAUTION If the mobile computer supports Windows Mobile, before plugging the RS232 cable you have to check the 'COM1 Enable' option on the 'System Configuration' window. (Start -> Programs -> System Configuration).
DATALOGIC SKORPIO™/ SKORPIO-GUN™ 2 2.4 MODEM CONNECTION The Datalogic Skorpio™ Single Cradle Modem has an integrated modem and provides a modem connector, which can be used with an RJ11 connector. It can be connected to a telephone line to transfer data to a Host. A B C Key: A) Datalogic Skorpio™ Single Cradle Modem B) Phone line to remote Hos C) Power Supply* * Recommended Power Supply: FPS18 AC/DC Power Supply (94ACC4595).
CONNECTIONS 2.6 2 WPAN CONNECTIONS Datalogic Skorpio™ Bluetooth® models can communicate with a Bluetooth® device, ® such as a printer, within a range of 10 m, using the on-board Bluetooth module. A B Key: A) Datalogic Skorpio™ ® B) Bluetooth printer NOTE In order to avoid wasting energy, the Bluetooth® module is off by default. If you need to have Bluetooth® working, the module must be powered on using the Wireless Communications applet (see par. 3.8.
DATALOGIC SKORPIO™/ SKORPIO-GUN™ 2 2.7 WLAN CONNECTION Datalogic Skorpio™ IEEE 802.11b and IEEE 802.11b/g models can communicate with the host using the on-board radio frequency module and an Access Point connected to the host computer. For the 7xx-xxx-xxx radio models, you can find information about the applet for radio configuration: http://www.summitdatacom.com/SCU.htm. To launch this utility you can tap the specific icon if it's visible on the taskbar or: 1.
CONNECTIONS 2 WLAN module is on by default, in order to avoid wasting energy, you can switch it off using the Wireless Communications applet. NOTE NOTE Suspending the terminal powers off the 802.11b/g radio and drops the radio connection. When the terminal resumes, depending on the radio power mode and security protocol selected, it takes approximately from 10 to 30 seconds for the 802.11b/g radio driver to re-associate the radio to the network.
DATALOGIC SKORPIO™/ SKORPIO-GUN™ 2 2.8 WIRELESS AND RADIO FREQUENCIES WARNINGS Use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications or attachments could damage the product and may violate laws and regulations. WARNING Most modern electronic equipment is shielded from RF signals. However, certain electronic equipment may not be shielded against the RF signals generated by Datalogic Joya™ and I7252™.
CONNECTIONS 2 WARNING RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles. Check with the manufacturer or its representative regarding your vehicle. You should also consult the manufacturer of any equipment that has been added to your vehicle. WARNING An air bag inflates with great force. DO NOT place objects, including either installed or portable wireless equipment, in the area over the air bag or in the air bag deployment area.
DATALOGIC SKORPIO™/ SKORPIO-GUN™ 3 3 USE AND FUNCTIONING The use of the Datalogic Skorpio™ depends on the application software loaded. However there are several parameters that can be set and utilities that can be used to perform some basic functions such as data capture, communications, file management, etc. 3.1 STARTUP The Datalogic Skorpio™ turns on when the battery pack or the external supply is inserted.
USE AND FUNCTIONING 3 The mobile computer goes into power-off (low power with display backlight off), when it is no longer used for more than a programmable timeout, which is defined in the POWER applet of the Control Panel. In this mode it can be awakened (resuming operation) by the [ON/OFF] key or SCAN key if enabled (see par. 3.8.1). The mobile computer can also be awakened or turned off by the application program.
3 3.2 DATALOGIC SKORPIO™/ SKORPIO-GUN™ WINDOWS MOBILE WELCOME WIZARD In Windows Mobile, at the very first Skorpio™ startup, following a cold boot or following a registry restore to default values, the mobile computer startup (see par. 3.1) is preceded by the Welcome Wizard. Welcome Wizard Screen The Welcome Wizard allows the user to calibrate the touch screen (see par. 3.8.6 and to configure an email account and a password to protect the terminal.
USE AND FUNCTIONING 3.3 3 USING THE STYLUS The stylus selects items and enters information. The stylus functions like a mouse. Tap: Touch the screen once with the stylus to open items and select options (Windows Mobile only). Double Tap: Touch the screen twice with the stylus to open items and select options (Windows CE only). Drag: Hold the stylus on the screen and drag across the screen to select text and images. Drag in a list to select multiple items.
DATALOGIC SKORPIO™/ SKORPIO-GUN™ 3 3.4 DATA CAPTURE To capture data first of all select the barcode icon on the bottom-right side of the display and tap the 'Capture' menu item then proceed with the following directions. To configure and enable data capture parameters refer to par. 3.7. 3.4.1 Laser Data Capture To scan barcodes, point the Datalogic Skorpio™ laser model onto the code from a distance within the reading range while pressing the SCAN key.
USE AND FUNCTIONING 3.5 3 DESCRIPTION OF THE KEYS The Datalogic Skorpio™ provides two different keyboards, an alphanumeric keyboard and a numeric keyboard, having a total of respectively 38 and 28 keys. 3.5.1 Alphanumeric Keyboard (38-Key Model) The following image shows the Alphanumeric keyboard.
DATALOGIC SKORPIO™/ SKORPIO-GUN™ 3 Main Keys Function KEY FUNCTION It starts data capture. If enabled, it also wakes up the mobile computer from low-power (see par. 3.8.1). For Datalogic Skorpio-GUN™ models only, the trigger performs the same function as the SCAN key. They let you move forwards, backwards, upwards or downwards within text fields, scroll through a Menu list or browse among folder files.
USE AND FUNCTIONING 3 Special Function Icons ICON FUNCTION After a blue modifier key press, it opens the Start menu. After a blue modifier key press, it opens the file manager. After a blue modifier key press, it modifies the display backlight intensity (5 levels available through subsequent presses). After a blue modifier key press, it locks and unlocks the keyboard.
3 3.5.2 DATALOGIC SKORPIO™/ SKORPIO-GUN™ Numeric Keyboard (28-Key Model) The following image shows the Numeric keyboard.
USE AND FUNCTIONING 3 Main Keys Function KEY FUNCTION It starts data capture. If enabled, it also wakes up the mobile computer from low-power (see par. 3.8.1). For Datalogic Skorpio-GUN™ models only, the trigger performs the same function as the SCAN key. They let you move forwards, backwards, upwards or downwards within text fields, scroll through a Menu list or browse among folder files.
DATALOGIC SKORPIO™/ SKORPIO-GUN™ 3 Special Function Icons ICON FUNCTION After a blue modifier key press, it modifies the display backlight intensity (5 levels available through subsequent presses).
USE AND FUNCTIONING 3.5.3 3 Resetting the SkorpioTM Windows CE There are several reset methods for the Skorpio. A warm boot terminates an unresponsive application and clears the working RAM, but preserves both the file system and the registry. A cold boot forces all applications to close and clears working RAM and files not resident on the persistent flash memory. Registry is restored from persistent memory if available or returned to factory default.
DATALOGIC SKORPIO™/ SKORPIO-GUN™ 3 To perform a clean boot, follow these steps: 1. 2. 3. 4. 5. Perform a Cold Boot (see Cold Boot). Quickly release all the keys when the screen goes black. Within 1 second press and hold down the Esc and 0 keys until the left orange led starts blinking. Release the Esc and 0 keys. Enter 1 to proceed with the Clean Boot sequence. Enter 0 to cancel the Clean Boot and proceed with a Cold Boot.
USE AND FUNCTIONING 3 To perform a warm boot, press and hold the following keys simultaneously: Cold Boot A cold boot is a complete reset of the Skorpio in which all applications are forcibly closed and the RAM is completely cleared. Registry is restored from persistent memory if a saved copy is available (see Registry Applet, par. 3.8.2). Applications and data stored on file system are preserved.
DATALOGIC SKORPIO™/ SKORPIO-GUN™ 3 3.6 3.6.1 STATUS INDICATORS LED Status The Datalogic Skorpio™ provides two different LEDs signaling the mobile computer status. LED STATUS Good Read and General Purpose (left-side) Green It is constant for a configurable time to signal that a successful read has occurred. Green/Red It is also available to the application program. Charging Status and Green constant Battery Low Warning It is constant once the charging process has been completed.
USE AND FUNCTIONING 3.6.2 3 Taskbar As well as tasks opened in Windows, the Taskbar provides several status icons that report information about the time, the battery level, the keyboard function, and the decoding status. ICONS DESCRIPTION Time and Battery Icons It displays the time. In Windows CE, they are representative of five different icons indicating the battery level. The icon is partially green when the power left is >20% and partially red colored when the power left is <20%.
3 DATALOGIC SKORPIO™/ SKORPIO-GUN™ Windows CE Taskbar Windows Mobile Taskbars 38
USE AND FUNCTIONING 3.7 3 DATA CAPTURE CONFIGURATION From the Windows CE Taskbar, tap the "Decoding" icon to open a drop–down menu. Decoding can also be accessed from the Control Panel. By selecting the Info item from this drop-down menu you can access information about the Scanner and the Software; the Configure item opens the configuration applet (Data Capture Configuration Window), while Capture accesses the data capture applet (Data Capture Window), which enables code reading.
3 DATALOGIC SKORPIO™/ SKORPIO-GUN™ The Scan Parameters are common to all scanner modules and allow control of the scanning device (i.e. LED control, laser timeout, etc.). Each Data Capture screen window corresponds to a branch of the tree, and the name of the current branch is displayed at the bottom of each screen window. Data Capture Configuration Window The screen format shows two columns where the left column indicates branches or parameters. Branches have three dots in the right column (...).
USE AND FUNCTIONING 3 Selecting Data Capture Setup Parameters Alternatively using the stylus, you can tap once directly on the value on the right column; continue tapping until the desired value is reached. To activate a new configuration select the File ->Save Menu to send the new configuration to the barcode decoding software and save the new configuration. This will save the configuration to non-volatile memory preventing loss at the next system reset.
3 DATALOGIC SKORPIO™/ SKORPIO-GUN™ ContinuousMode: when enabled, the scanner can only be turned off by releasing the SCAN key, or if Soft Trigger is enabled, by the application program. Continuous Mode overrides Scan Timeout. KeyboardEmulation: if enabled all scanned data are transformed into keyboard events and can therefore be displayed and saved to a file as if input from the mobile computer keyboard. If set to "Yes (Clipboard)", it copies the scanned data to the system clipboard.
USE AND FUNCTIONING 3 Default Settings The following tables contain the default values for the major barcode setup parameters, according to the type of scan engine mounted on the mobile computer. For a complete list of parameters and of their configuration procedures, please refer to the SDK Help file on the CD. SCAN PARAMETERS ScanTimeout GoodReadSound LedDuration LedPulses ContinuousMode KeyboardEmulation SoftTrigger ScanAlwaysOn GreenSpotDuration NotPrintableChar ScanButton 5000 Beep.
DATALOGIC SKORPIO™/ SKORPIO-GUN™ 3 3.7.2 Capture The Data Capture applet (Capture) enables code reading. Data Capture Window Data Capture can also be enabled through the Configuration applet by selecting File ->Scanner from the main menu, or by enabling the parameter Scan Always On in the Scan Parameters branch.
USE AND FUNCTIONING 3.8 3 CONTROL PANEL From the Windows CE Desktop, double tap on the "My Device" icon and then double tap on the "Control Panel" icon to open the Windows CE control panel main window. The Control Panel can also be launched from Start ->Settings ->Control Panel. APPLET programs are displayed as icons; one icon corresponds to each APPLET. Windows CE Control Panel From the Windows Mobile Start menu, tap Settings. A three tab dialog opens: Personal, System, Connections.
DATALOGIC SKORPIO™/ SKORPIO-GUN™ 3 3.8.1 Buttons To configure the way up/down and the rest of keys control repeats, use the Up/Down Control applet (Start -> Settings -> Personal -> Buttons -> Up/Down Control). Windows CE Buttons Icon Windows Mobile Buttons Icon On both Windows CE and Windows Mobile models, you can also select to wake up the terminal by the SCAN key and trigger key (for Datalogic Skorpio-GUN™ only).
USE AND FUNCTIONING 3.8.2 3 Registry The REGISTRY ADMIN applet provides management of Windows CE/ Windows Mobile registry. From the Windows CE control panel main window, select the REGISTRY ADMIN applet by double tapping the Registry Admin icon. From the Windows Mobile Start menu, tap Settings -> System ->Registry Admin. Select the REGISTRY ADMIN applet by tapping the Registry Admin icon. The Registry Administration Main window appears.
DATALOGIC SKORPIO™/ SKORPIO-GUN™ 3 3.8.3 Files Admin The FILES ADMIN applet enables control of the permanence of files in the Windows CE System Folder. Because Windows Mobile mounts the entire file system in persistent store (rather than using RAM), it provides both users and applications with a reliable storage platform even in the absence of battery power. The FILES ADMIN applet is therefore not necessary.
USE AND FUNCTIONING 3 Two activating procedures are available for Safe Setup: - Select an installation file (for example, a .CAB cabinet file) from the Safe Setup mask. Safe Setup First Mask Then select \Windows or a relevant sub-directory in the path box. Then, Safe Setup will recognize the new files and directories present in the \Windows directory, and will copy them to the \Backup\Windows directory. At the next cold boot, these files will be restored (see par. 3.10).
DATALOGIC SKORPIO™/ SKORPIO-GUN™ 3 3.8.4 Wireless Communications The WIRELESS COMMUNICATIONS applet provides management of the WLAN ® Card and of the Bluetooth module. Windows CE Wireless Communications Icon Windows Mobile Connectivity Icon If the mobile computer supports Windows CE, select the WIRELESS COMMUNICATIONS applet by double tapping the Wireless Communications icon.
USE AND FUNCTIONING 3 If the mobile computer supports Windows Mobile, the Wireless Manager application manages access to wireless connections. The 'Wireless Manager' is a sort of 'Control Panel' for bluetooth and phone modules. From here it's possible to turn on or off bluetooth and phone radio stacks. Open the Wireless Manager by tapping Start -> Settings -> Connections -> Wireless Manager, or by tapping the Connectivity icon located at the top of the screen.
DATALOGIC SKORPIO™/ SKORPIO-GUN™ 3 3.8.5 Ethernet Settings Windows CE Ethernet Cradle Datalogic Skorpio™ can be connected to an Ethernet network by inserting it into the Datalogic Skorpio™ Single Cradle Ethernet or into the Datalogic Skorpio™ Ethernet Multi Cradle. NOTE Ethernet communication requires Datalogic Skorpio™ SW version 5.41 or later. Verify the software version by tapping on Software – Version in the Datalogic default home page. Otherwise, search for the file version.
USE AND FUNCTIONING 3 The LAN icon will appear on the Taskbar indicating the LAN connection status. By double tapping on the LAN icon in the Taskbar, the LANNDS1 applet allows visualizing the TCP/IP information. Other information such as the MAC Address is available by tapping the Details... button. If it is necessary to set static TCP/IP parameters, you must open the LANNDS1 applet from the Network and Dial-up Connections applet in the Control Panel.
3 DATALOGIC SKORPIO™/ SKORPIO-GUN™ Windows Mobile Ethernet Cradle Before using the ethernet cradle you have to un-check the 'COM1 Enable' option on the 'System Configuration' window (Start -> Programs -> System Configuration) and re-boot the unit.
USE AND FUNCTIONING 3.8.6 3 Stylus Calibration You might need to recalibrate the touch screen (i.e. when you attempt to select one item with the stylus, another item is erroneously selected). To recalibrate the touch screen on Windows CE, complete the following steps: 1. Select Start > Settings > Control Panel > Stylus to open the Stylus Properties dialog as shown in Figure 1. 2. Adjust Double-Tap sensitivity if needed or desired. 3. Select the Calibration tab to open the Calibration application.
3 DATALOGIC SKORPIO™/ SKORPIO-GUN™ Figure 2 To recalibrate the touch screen on Windows Mobile, complete the following steps: 1. Select Start > Settings > System > Screen to open the Screen Settings dialog as shown in Figure 3.
USE AND FUNCTIONING 2. 3. 4. 5. 3 Tap Align Screen to open the Calibration screen shown in Figure 4. Carefully press and briefly hold stylus on the center of the target. Repeat as the target moves around the screen. Press the key at any time to cancel the stylus calibration. By completing the calibration procedure you implicitly accept the new calibration settings. New calibration settings are persistently saved in registry.
3 DATALOGIC SKORPIO™/ SKORPIO-GUN™ Startup stylus calibration on Windows CE When starting the terminal, a stylus calibration screen comes up if valid calibration settings are not available. This happens in the following circumstances: 1. 2. 3. 4. At the first startup of the terminal. After restoring registry default settings using the applet Registry Admin and performing a warm boot. After a Clean Boot. After a Firmware Update (see par. 3.11).
USE AND FUNCTIONING 3.9 3 WINDOWS CONNECTIONS To connect Datalogic Skorpio™ to another device (i.e. Host PC) from Windows, several programs are available. These programs require specific electrical connections in order to function properly. 3.9.1 Microsoft® ActiveSync® Microsoft® ActiveSync® gives you the possibility to connect your desktop computer to your Datalogic Skorpio™ and synchronize the information on them.
DATALOGIC SKORPIO™/ SKORPIO-GUN™ 3 For example: Synchronize Microsoft Word and Microsoft Excel files between the Datalogic Skorpio™ and the desktop computer. The files will automatically be converted to the correct format. In Windows Mobile before using the ActiveSync follow the directions described in 2.3. NOTE NOTE Visit the following Microsoft Web site for the latest in updates, technical information, and samples: http://www.microsoft.
USE AND FUNCTIONING 3.9.2 Uploading/Downloading Connection 3 Files through an RS232 Files can be uploaded/downloaded through the device cradle connected via an RS232 cable. Before performing this operation, it is first necessary to define the PC and the mobile computer settings and connection. If uploading/downloading files through a serial connection, Microsoft® ® ActiveSync is not used.
3 DATALOGIC SKORPIO™/ SKORPIO-GUN™ connection name, select “Direct Connection” and press “Next”. From the device list select “Serial cable on COM1” and change the communication speed under “Configure” to 115200 baud. Then, press “Security Settings” and select the “Preview user name and password” flag. Press “Finish” to save the configuration and close all windows.
USE AND FUNCTIONING 3.9.3 3 Bluetooth® Manager Device Setup Windows CE Bluetooth® Manager Device Setup In order to enable a Bluetooth® device for communication with the Datalogic Skorpio™ you must perform the discovery procedure and enable the device as follows: 1. Place the Bluetooth® device within the range of the Datalogic Skorpio™ (10 meters). 2. From the “Control Panel” main window double tap on the “Bluetooth” applet to open the Bluetooth® Manager Device window: 3.
3 DATALOGIC SKORPIO™/ SKORPIO-GUN™ By tapping on the “HW Details” and “SW Details” buttons, information about the ® mobile computer Bluetooth hardware and software will be displayed, while the ® “Enable Encryption” button starts encryption of the Bluetooth communication ® data. If tapping on the “Close” button the Bluetooth Manager Device window will be closed. 4.
USE AND FUNCTIONING 5. 3 Once the desired Bluetooth® device has been selected, tap on the “Connection Wizard” button to enter the related window where selecting the connection type ® to be used for communication with the Bluetooth device: ® The “Serial Port” button starts communication through the Bluetooth serial port COM 5. ® The “Printer” button starts communication with a printer through the Bluetooth serial port COM 5.
DATALOGIC SKORPIO™/ SKORPIO-GUN™ 3 Windows Mobile Bluetooth® Manager Device Setup Before turning on Bluetooth®, ensure that the two devices are within close range and that both Bluetooth-enabled devices are discoverable. 1. Tap Start -> Settings -> Connections tab. 2. Tap Bluetooth > Mode 3. Select or clear the “Turn on Bluetooth” check box: By default, Bluetooth® is turned off. If you turn it on, and then turn off your device, Bluetooth® also turns off.
USE AND FUNCTIONING 3 3. Tap the name of the other device, and tap Next: 4. In Passkey, if you want to use a passkey (recommended for enhanced security), enter a alphanumeric passkey between 1 and 16 characters, and tap Next.
3 DATALOGIC SKORPIO™/ SKORPIO-GUN™ 5. Enter the same passkey on the other device. 6. To give the partnership a more meaningful name, change the name of the device in Name. 7. Tap Finish. You can give a more meaningful name to a Bluetooth® partnership to help you recognize it when selecting from a list of partnerships. 1. Tap Start -> Settings -> Connections tab. 2. Tap Bluetooth > Devices tab. 3. Tap the partnership to rename. 4. In Name, enter a new name for the partnership. 5. Tap Finish.
USE AND FUNCTIONING 3 Other devices with Bluetooth® capabilities can detect your device and attempt to beam information to it, establish a partnership, or use a Bluetooth® service. To make a device discoverable: 1. Tap Start -> Settings -> Connections tab. 2. Tap Bluetooth > Mode Tab. 3.
3 DATALOGIC SKORPIO™/ SKORPIO-GUN™ If you no longer want your device to be discoverable, clear the “Make this device visible to other devices” check box. Your device will not detect and notify you of incoming Bluetooth® beams unless you set it up to do this. To receive a Bluetooth® beam: 1. Tap Start -> Settings -> Connections tab -> Beam: 2. Select the “Receive all incoming beams” check box: 3.
USE AND FUNCTIONING 3.9.4 3 FTP Server Setup The Datalogic Skorpio™ Windows CE Operating System includes a sample File Transfer Protocol (FTP) server. FTP is used for copying files to and from remote computer systems over a network using TCP/IP. You can establish a connection to your Datalogic Skorpio™ using its FTP Server through the following interfaces: WLAN LAN through the Datalogic Skorpio™ Single Cradle Ethernet or the Datalogic Skorpio™ Ethernet Multi Cradle (see par. 3.8.
3 DATALOGIC SKORPIO™/ SKORPIO-GUN™ Datalogic Skorpio™ WLAN models only (without Bluetooth®) do not contain the FTP Server. If necessary you can install it from the CDROM in the Utilities folder.
USE AND FUNCTIONING 3 3.10 BACKUP DIRECTORY FILE MANAGEMENT All of the Windows CE system files reside in RAM (volatile memory) except for the Backup directory, which resides in FLASH (non-volatile memory). Therefore the contents of the Backup directory are persistent even if the mobile computer is rebooted or the battery pack is changed. You can save your more important files that you don't want to lose due to mobile computer re-boot, in the Backup directory or create a sub-directory within Backup.
3 DATALOGIC SKORPIO™/ SKORPIO-GUN™ 3.11 FIRMWARE UPDATE FOR WINDOWS CE The Datalogic Skorpio™ is equipped with a tool that implements a firmware update service. For further information, refer to DFU Reference Guide.
MAINTENANCE 4 4 MAINTENANCE Rechargeable battery packs are not initially charged. Therefore the first operation to perform is to charge them. See below. NOTE CAUTION 4.1 By default, the battery pack is disconnected at the factory to avoid damage due to excessive draining. Annual replacement of rechargeable battery pack avoids possible risks or abnormalities and ensures maximum performance.
4 CAUTION NOTE 76 DATALOGIC SKORPIO™/ SKORPIO-GUN™ If the battery pack is new or has not been recharged for a long time, it is necessary to perform two or three charging and discharging cycles (complete use) before it can reach its maximum charge capability. The maximum time required to recharge a completely run-down battery pack is 4 hours if recharged into the mobile computer.
MAINTENANCE 4.2 4 REPLACING THE BATTERY PACK 4.2.1 Datalogic Skorpio™ Models To correctly replace the battery pack, proceed as follows. 1. Turn off the Datalogic Skorpio™. 2. Turn the battery lock screw to the open position (horizontal), then pull the lock runner up, as indicated in the figure below. 3. Remove the battery pack.
DATALOGIC SKORPIO™/ SKORPIO-GUN™ 4 4. To correctly insert the new battery pack, first insert the bottom and then the upper part of the battery pack into the slot as indicated in the following figure: 5. Press it until the battery latch is automatically closed. 4.2.2 Datalogic Skorpio-GUN™ Models To correctly replace the battery pack, proceed as follows. 1. Turn off the Datalogic Skorpio-GUN™. 2. Remove the battery pack, by pulling the battery latch down.
MAINTENANCE 4 Battery Contacts 3. To correctly insert the new battery pack, first insert the bottom and then the upper part of the battery pack into the slot as indicated in the following figure: 4. Press it until the battery latch is automatically closed.
4 DATALOGIC SKORPIO™/ SKORPIO-GUN™ Installing, charging and/or any other action should be done by authorized personnel and following this manual. WARNING The battery pack may get hot, explode, ignite, and/or cause serious injury if exposed to abusive conditions. If the battery pack is replaced with an improper type, there is risk of explosion.
MAINTENANCE 4 Do not pierce the battery pack with nails, strike it with a hammer, step on it or otherwise subject it to strong impacts or shocks. WARNING Do not disassemble or modify (i.e. bend, crush or deform) the battery pack. The battery pack contains safety and protection devices, which, if damaged, may cause the battery pack to generate heat, explode or ignite. In case of leakage of liquid from the battery, avoid contact with liquid the skin or eyes.
4 NOTE DATALOGIC SKORPIO™/ SKORPIO-GUN™ In order to guarantee an adequate operating autonomy, when replacing the battery pack the mobile computer checks the battery energy level. If the battery is not sufficiently charged, Datalogic Skorpio™ does not turn on (when pressing the ON button). In this case, either substitute the battery pack with a charged one (sufficiently charged) or insert Datalogic Skorpio™ into a powered cradle or plug it into the direct power supply.
MAINTENANCE 4.3 4 COMPACT FLASH AND SECURE STORAGE CARDS The Datalogic Skorpio™ supports both Compact Flash and Mini Secure Digital storage cards. The Mini SD storage card slot accepts storage cards only, while the Compact Flash card slot accepts either a storage card or the 802.11b/g radio card.
DATALOGIC SKORPIO™/ SKORPIO-GUN™ 5 5 5.1 TECHNICAL FEATURES TECHNICAL DATA Electrical Features Power DC supply Battery pack 5.25 V ± 6% Datalogic Skorpio™ only: 1 cell Li-Ion 2100 mAh@ 3.7 V (7.8 Watt-hours) Datalogic Skorpio™-GUN only: 1 cell Li-Ion 3300 mAh@3.7 V (12.2 Watt-hours) Windows Mobile COM Communication Features Windows CE COM Port Port Bluetooth interface COM5 COM5 Serial interface RS232 COM1 COM1 USB 1.1 COM6 COM6 Wireless Features WLAN IEEE 802.11b/g (WLAN) WPAN Bluetooth® IEEE 802.
TECHNICAL FEATURES Environmental Features Working temperature** Storage temperature Humidity*** Protection ESD protection Drop resistance**** Mechanical Features Dimensions (LxWxH) 5 -10° to + 50 °C / 14° to +122 °F -20° to +70 °C / -4° to +158 °F 90% non condensing for temperatures<40°C IP64 4 KV contact discharge, 8 KV air discharge 1.5 m / 5 ft Datalogic Skorpio™ only: 19.6 x 7.7 x 3.3 cm / 7.7 x 3.0 x 1.3 in Datalogic Skorpio-GUN™ only: 19.6 x 7.7 x 15.8 cm / 7.7 x 3.0 x 6.
DATALOGIC SKORPIO™/ SKORPIO-GUN™ 5 5.
TECHNICAL FEATURES 5 Datalogic Skorpio-GUN™ XXX-2XX only Guaranteed Reading Diagram - Reading Zones (10° skew angle) 1,00 mm (40 mils) 0,50 mm (20 mils) 400 0,38 mm (15 mils) 0,25 mm (10 mils) 300 1,4 mm (55 mils) 200 100 0 100 200 300 400 mm 0 200 400 600 800 1000 1200 1400 1600 1800 2000 2200 mm 87
DATALOGIC SKORPIO™/ SKORPIO-GUN™ 6 6 TEST CODES High Density Codes 0.
TEST CODES 6 Medium Density Codes 0.
DATALOGIC SKORPIO™/ SKORPIO-GUN™ 6 Low Density Codes 0.
GLOSSARY Access Point A device that provides transparent access between Ethernet wired networks and IEEE 802.11 interoperable radio-equipped mobile units. Hand-held mobile computers, PDAs or other devices equipped with radio cards, communicate with wired networks using Access Points (AP). The mobile unit (mobile computer) may roam among the APs in the same subnet while maintaining a continuous, seamless connection to the wired network.
DHCP Dynamic Host Configuration Protocol. A set of rules used by a device (such as a computer, router or networking adapter) to request and obtain an Internet address from a server which has a list of addresses available for assignment. EEPROM Electrically Erasable Programmable Read-Only Memory. An on-board non-volatile memory chip. Flash Disk Non-volatile memory for storing application and configuration files.
INDEX A Accessories; 10 Alphanumeric Keyboard; 27 Available Models; 3 F FCC Compliance; xv Files Admin; 48 Firmware Update; 74 FTP Server Setup; 71 B Backup Directory File Management; 73 Belt Clip; 7 Bluetooth Approval; vi ® Bluetooth Manager Device Setup; 63 Buttons; 46 C Capture; 44 Charging the Batteries; 75 Cleaning the Mobile Computer; 83 Compact Flash and Secure Storage Cards; 83 Connections; 12 Connection to USB peripherals; 13 Ethernet Connection; 16 Modem Connection; 16 RS232 Connection; 14 USB C
Replacing the Batteries; 77 Resetting the Skorpio; 33 Test Codes; 88 U S Safe Setup; 48 Safety Regulations; vi SAR Compliance; xv Save Session; 48 Scan Parameters; 41 Services and Support; v Startup; 22 Status Indicators; 36 Stylus; 9 Stylus Calibration; 55 T Taskbar; 37 Technical Data; 84 Technical Features; 84 94 Uploading/Downloading Files through an RS232 Connection; 61 Using the Stylus; 25 W WEEE Compliance; xvi Windows CE Bluetooth® Manager Device Setup; 63 Windows CE Ethernet cradle; 52 Windows C
Datalogic Mobile S.r.l. Via S.
Datalogic Mobile S.r.l. Via S.
Skorpio™/Skorpio-GUNTM www.mobile.datalogic.com World wide Sales Network available from: www.mobile.datalogic.com/contacts Datalogic Mobile S.r.l. Via S. Vitalino, 13 40012 Lippo di Calderara di Reno Bologna - Italy Telephone: (+39) 051-3147011 Fax: (+39) 051-3147561 ©2006-2009 Datalogic Mobile S.r.l. 822000688 (Rev.
