Quick Reference Guide
Table Of Contents
- Gryphon™ I GBT/GM4500
- Table of Contents
- END USER SOFTWARE LICENSE AGREEMENT
- About the Scanner
- Setting Up the Reader
- Reader, Cradle and LEDs Description
- Connecting the Base Station
- System and Network Layouts
- Using the GBT/GM4500 Scanner
- Using the WLC4090 Radio Base
- Replacing the Battery Pack
- Using the Gryphon™ I GBT/GM4500
- Linking the Reader
- Link Scanner as Serial Device to a Bluetooth Host
- Link Scanner as HID device to a Bluetooth host
- Power Off
- Selecting the Interface Type
- Programming
- Reading Parameters
- Operating Modes
- Technical Features
- LED and Beeper Indications
- Troubleshooting
- Ergonomic Recommendations
- Cleaning Procedure
- Support Through the Website
- Charging the Batteries
- Datalogic Limited Factory Warranty
Technical Features
38 Gryphon™ I GBT/GM4500
Technical Features
Gryphon™ I GBT-GM4500
Electrical Features
Power Supply
5V to 14V +/-5% in the Communication Port
5V to 14V +/-5% in the Aux Power Port
NOTE: Aux Power Port is recommended
when long cables are connected to Commu-
nication Port
Consumption
(Typical)
Gun Only: 330 mA @ 3,7V(Operative)
Cradle Only: 80 mA @ 5V (Operative)
Cradle with Gun in Charge (
Scan while Charging
):
475 mA (PC host USB)
1150 mA (
5V on Aux Power Port)
520 mA (
12V on Aux Power Port)
Gun Charging via micro USB:
480 mA (
PC host port, no Scan)
900 mA (wall adapter, no Scan)
1160 mA (
wall adapter, Scan while
Charging
)
Battery Capacity Li-Ion 3.6V, 3250 mAh (11.7W/h)
Recharge Time
(
Typical)
Values valid for a fully depleted battery
USB Only:
11h (no Scan)
15h (Scan while Charging)
Using Aux Power Port:
3h (no Scan)
3.5h (Scan while Charging)
Using micro USB (wall adapter):
2h (no Scan, with Wall Adapter)
4.6h (no Scan, with PC Host)
Max. Scan Rate 50 frames/sec
Reading Indicators
Top and rear illumination, Good Read Spot,
Beep, Vibrator