User's Manual

COMPACT MAX Reader User Manual 7 05.08.2014
3 Connect the COMPACT MAX to a PC
The PC can be used for many functionalities:
1. To charge the reader’s battery
2. To configure the reader with the S-ID
3. To use the reader as a Mass Storage device like a USB storage pen
4. To connect the reader with the USB in Virtual Com Port to send or receive data
5. To connect the reader with the USB in Keyboard Wedge mode
4 Take care of the reader
Ensure that the reader is not damaged. Do not drop it onto a hard surface or subject it to very wet
conditions.
If the outer casing of the reader becomes soiled, it can cleaned with a damp cloth. First, ensure that it is not
connect to the charger.
If for any reason the reader is not working, please do not attempt to repair it, return it to your local dealer.
The COMPACT MAX reader is equipped with Li-Ion type battery. This battery lasts longer and does not
contain Cadmium or lead, which makes it much safer for the environment. If the reader has to be
destroyed, please return it to a battery specialist for battery recycling.
The display of the COMPACT MAX reader may change color if exposed to temperatures higher than 50°C.
It will return to its original color as soon as the temperature gets below 50°C.
At very low temperatures, the display may lose its contrast, but at normal temperatures, it will return to its
normal contrast.
5 Specifications
1. Storage temperature: -20 to +45 °C, 85% RH, non-condensing
2. Normal operating temperature: -10 to +55 °C, 85% RH non-condensing
3. Standards: ISO11784/5, ISO11784-AMD1 and ISO24631-2
4. External power supply: USB cable
5. Dimensions: 157x82x20 mm
6. TAG compatibility: FDX-A, FDX-B and Trovan
7. Transmission frequency: 134.2 kHz
8. Battery life: >500 cycles
9. Weight: 174 g
10. Interfaces to host PC: USB