User's Manual

OMNI MAX Reader User Manual 10 11.12.2013
4 Connect the OMNI MAX to a PC
The PC can be used for three functionality:
1. To charge the reader’s battery
2. To configure the reader with the S-ID
3. To use the reader as a Mass Storage device like a USB storage pen
4. To connect the reader with the USB in Virtual Com Port to send or receive data
5. To connect the reader with the USB in Keyboard Wedge mode
6. To connect the reader with the Bluetooth module in Virtual Com Port to send or receive data
7. To connect the reader with the Bluetooth module in in Keyboard Wedge mode
5 Take care of the reader
Ensure that the reader is not damaged. Do not drop it onto a hard surface or subject it to very wet
conditions.
If the outer casing of the reader becomes soiled, it can cleaned with a damp cloth. First, ensure that it is not
connect to the charger.
If for any reason the reader is not working, please do not attempt to repair it, return it to your local dealer.
The OMNI MAX reader is equipped with Li-Ion type battery. This battery lasts longer and does not contain
Cadmium or lead, which makes it much safer for the environment. If the reader has to be destroyed, please
return it to a battery specialist for battery recycling.
The display of the OMNI MAX reader may change color if exposed to temperatures higher than 50°C. It will
return to its original color as soon as the temperature gets below 50°C.
At very low temperatures, the display may lose its contrast, but at normal temperatures, it will return to its
normal contrast.
6 Specifications
1. Storage temperature: -10 to +55 °C, 85% RH, non-condensing
2. Normal operating temperature: +5 to +40 °C, 85% RH non-condensing
3. Standards: ISO11784/5, ISO11784-AMD1 and ISO24631-2
4. External power supply: USB cable
5. Dimensions: 266x148x27 mm
6. TAG compatibility: FDX-A, FDX-B, HDX, Trovan
7. Transmission frequency: 134.2 kHz
8. Battery life: >500 cycles
9. Weight: 440 g
10. Interfaces to host PC: USB and Bluetooth