User's Manual

Installation & Operation Manual V 1.0 4 (19)
1 INTRODUCTION
The Datamars R-IN1300 High Frequency (HF) RFID-reader, designed to work in industrial
environment, is resistant to vibrations, electromagnetic interferences and is able to detect the
following transponder technologies:
§ T-BT 1320 & T-BT1315 (ISO 15693), HF
§ T-BT 7xxx serie, LF (only with Datamars R-IN7500 reader connected externally)
§ Other types of transponders could be read in “Combo” mode.
The reader is able to find simultaneously more than one High Frequency (HF - multi read)
transponder
1
and one Low Frequency (LF – single read) chip at the same time if you have a R-
IN7500 Low Frequency reader connected on the Secondary Interface.
LEDs
Power lights on when the reader is switched on
Tag lights on when one or more transponder are detected
Antenna lights on when the antenna is not tuned or is near metallic objects or
not connected
HF High Frequency reading is ON
Combo The system is working in Combo mode (see chapter 2)
Error General Error
Antennas
HF Antennas TX/RX antenna channels from 1 to 6
Splitter 2 splitted channels (0° phase shift)
RX Antenna RX channel very sensibile!
1
the quantity of transponders detected and the accuracy of it can change depending on the used transponder, the environment,
the size of the antenna, etc.
Secondary Interface
Host Interface
Digital I/O
HF Antennas
Power
Tag
Antenna
RX Antenna
Splitter
HF
Combo
Error
USB
Ethernet