User's Manual

Installation & Operation Manual V 1.0 8 (19)
3 OPERATION WITH TERMINAL
For operation with terminal use any kind of terminal for example Windows HyperTerminal with the
following settings:
• Bits per second 115200
• Data bits 8
• Parity None
• Stop bits 1
• Flow control None
3.1 LIST OF THE COMMANDS OF THE READER
All commands must be followed by a carriage return (ENTER)
General Commands Explanation
*d Detect:
returns the UID-list of all the HF transponders in the field
*t Totalize:
Returns the number of HF transponders present in the field
*i Interrupts any continuous mode operation (does not disable the
continuous mode)
*x List of the commands and settings
*se Settings:
Displays the current settings (Notice that the settings are maintained
after power off)
*st Store UIDs (Any stored UIDs will disappear after power off)
*dw Download all the codes previously stored with *st