User's Manual

Installation & Operation Manual V 1.0 9 (19)

General settings

Explanation

*ec[_] Echo:

*ec0 echo disabled (default)

*ec1 echo enabled

“echo” makes it possible to view the characters sent to the reader.

*co[_] Continuous mode:

*co0 continuous mode enabled (default)

*co1 continuous mode disabled

*rh[_] Remove headers:

*rh0 does not remove the headers

*rh1 removes the headers (default)

*it[_] Input trigger:

*it0 input trigger disabled (default)

*it1 input trigger 1 enabled

*it2 input trigger 2 enabled

Details for *it1:

Use:

• When IN1 is high level, it’s possible to read the transponder.

• t

min 10 ms.

• See Appendix B to know where IN±1 pins are.

• See Appendix B for electric characteristics of the input.

Details for *it2:

Input 1

(IN±1)

Input 2

(IN±2)

Input 1

(IN±1)