User's Manual
Table Of Contents
- 1 Introduction
- Hardware connections
- Operation with Terminal
- 4 Operation with Graphical User Interface (GUI)
- Connecting with the COM (RS-232)
- Connecting with Ethernet (Recommended)
- General Considerations
- 4.4 Connect (Serial version only)
- Login (Web Server version only)
- Logout (Web Server version only)
- Network Setup
- 4.8 RS 232 Setup
- Reader Setup
- Advanced Reader Setup
- Configurations
- Monitor
- Firmware Update
- How to install the RS-232 interface
- System Requirements
- 5 Technical Specifications for R-IN1300 MID
- Appendix A – Connecting the R-IN1300 MID to a PC with a cross cable
- Appendix B - Code length
- Appendix C - Troubleshooting
4.10 ADVANCED READER SETUP
The “Advanced Reader Setup” tab allows users to specify advanced properties of the reader.
The “Skip Timeslot On No Response” field specifies whether or not empty timeslots must be skipped
(that’s to say “wait no longer if it seems that no tag is here”).
It is recommended to enable this feature.
The “Collision Threshold” field is a highly complex parameter. It is recommended to set it to 33.
The “Receiver Gain” field specifies the sensitivity of the reader’s input ( 0: less sensitive 3: most
sensitive).
4.11 CONFIGURATIONS
R-IN1300 MID Manual – v. 1.2 – August ‘08 18 (29)