User's Manual
Table Of Contents
- Contents:
- 1 Description
- 2 Operation
- 3 Managing the menu
- 4 Connect your R-PO7470 to a PC
- 5 Battery managment
- 6 Take care of your reader
- 7 Specifications
- 8 Regulations
- 9 Technical supplement – Console commands
- 9.1 Introduction
- 9.2 How to connect the R-PO7470 to a PC through USB
- 9.3 How to connect the R-PO7470 to a PC through BlueTooth
- 9.4 Console commands description
- 9.4.1 Get firmware version command
- 9.4.2 Read remotely command
- 9.4.3 Sets the date’s year
- 9.4.4 Sets the date’s month
- 9.4.5 Sets the date’s day of the month
- 9.4.6 Sets the date’s day of the week
- 9.4.7 Sets the current date format
- 9.4.8 Gets the current date format
- 9.4.9 Gets the current date
- 9.4.10 Sets the time’s hour
- 9.4.11 Sets the time’s minute
- 9.4.12 Sets the time’s second
- 9.4.13 Gets the current time
- 9.4.14 Clears the memory’s data
- 9.4.15 Downloads the memory’s data
- 9.4.16 Clears the message area
- 9.4.17 Write a message to the display
- 9.4.18 Sets the “store in memory” function
- 9.4.19 Gets the “store in memory” function status
- 9.4.20 Sets the “memory hit” function
- 9.4.21 Gets the “memory hit” function
- 9.4.22 Sets the “selected hit” function
- 9.4.23 Gets the “selected hit” function
- 9.4.24 Sets the “reading beep” function
- 9.4.25 Gets the “reading beep” function status
- 9.4.26 Sets the “key beep” function
- 9.4.27 Gets the “key beep” function status
- 9.4.28 Sets the reading timeout
- 9.4.29 Gets the reading timeout
- 9.4.30 Sets the shutdown timeout
- 9.4.31 Gets the shutdown timeout
- 9.4.32 Sets the VCP baud rate
- 9.4.33 Gets the VCP baud rate
- 9.4.34 Sets the “auto shutdown” function
- 9.4.35 Gets the “auto shutdown” function status
- 9.4.36 Firmware update function
- 9.4.37 Character length function
3.6.1 Act as a server
This command sets the default server profile. The default server profile is the profile that other
devices can connect to when the Serial Port Adapter is in data mode.
3.6.2 Act as a client
This command sets the default client profile. The default client profile is the profile that the
Serial Port Adapter uses when it establishes a connection, in data mode, to the default remote
peer.
4 Connect your R-PO7470 to a PC
4.1 USB driver installation guide for Windows OS
Note: This example has been made using Windows 2000. It is the same for Windows XP as
well as older operating systems. The template may change from one system to another but the
procedure is the same. For more information, please refer to the Operating system manual.
1. Insert the R-PO7470 CD in the PC. The CD will start automatically.
It is possible to close the application. It is not necessary to have it running at this point.
2. Insert the USB cable in the reader and the PC. The PC will found a new hardware
3. Follow the instructions. See the example below
USB <-> Serial
Welcome Message
Click next
R-PO7470 Manual – v. 1.1 – August 2008 12