User's Manual
Table Of Contents
- Contents:
- 1 Description
- 2 Operation
- 3 Managing the menu
- 4 Connect your R-PO7470 to a PC
- 5 Battery managment
- 6 Take care of your reader
- 7 Specifications
- 8 Regulations
- 9 Technical supplement – Console commands
- 9.1 Introduction
- 9.2 How to connect the R-PO7470 to a PC through USB
- 9.3 How to connect the R-PO7470 to a PC through BlueTooth
- 9.4 Console commands description
- 9.4.1 Get firmware version command
- 9.4.2 Read remotely command
- 9.4.3 Sets the date’s year
- 9.4.4 Sets the date’s month
- 9.4.5 Sets the date’s day of the month
- 9.4.6 Sets the date’s day of the week
- 9.4.7 Sets the current date format
- 9.4.8 Gets the current date format
- 9.4.9 Gets the current date
- 9.4.10 Sets the time’s hour
- 9.4.11 Sets the time’s minute
- 9.4.12 Sets the time’s second
- 9.4.13 Gets the current time
- 9.4.14 Clears the memory’s data
- 9.4.15 Downloads the memory’s data
- 9.4.16 Clears the message area
- 9.4.17 Write a message to the display
- 9.4.18 Sets the “store in memory” function
- 9.4.19 Gets the “store in memory” function status
- 9.4.20 Sets the “memory hit” function
- 9.4.21 Gets the “memory hit” function
- 9.4.22 Sets the “selected hit” function
- 9.4.23 Gets the “selected hit” function
- 9.4.24 Sets the “reading beep” function
- 9.4.25 Gets the “reading beep” function status
- 9.4.26 Sets the “key beep” function
- 9.4.27 Gets the “key beep” function status
- 9.4.28 Sets the reading timeout
- 9.4.29 Gets the reading timeout
- 9.4.30 Sets the shutdown timeout
- 9.4.31 Gets the shutdown timeout
- 9.4.32 Sets the VCP baud rate
- 9.4.33 Gets the VCP baud rate
- 9.4.34 Sets the “auto shutdown” function
- 9.4.35 Gets the “auto shutdown” function status
- 9.4.36 Firmware update function
- 9.4.37 Character length function
6 Take care of your reader
Ensure that the reader does not get damaged. Do not drop it onto a hard surface or subject it to very
wet conditions.
If the outer casing of the reader becomes soiled it can be cleaned with a slightly humid cloth. First
ensure that it is not connected to the charger.
If for any reason the reader is not working, please do not attempt to repair it, but return it for repair to
your local dealer.
The R-PO7470 reader is equipped with a Li-ion type battery. This battery lasts longer, does not
contain Cadmium or lead, which makes it much safer for the environment. If the reader is to be
destroyed, please return it to a battery specialist, for battery recycling.
The display of the reader R-PO7470 may change colour if exposed to temperatures higher than 50°C.
It will return to its original colour as soon as the temperature gets below 50°C.
At very low temperatures the display may lose its contrast but at normal temperatures it will return to
the normal contrast.
7 Specifications
1. Storage temperature: -40 to +70 °C, 95% RH, non condensing.
2. Operating temperature while battery under charge: 0 to +40 °C, 95 % RH non condensing.
3. Normal operating temperature: -5 to +50 °C, 95% RH non condensing.
4. Housing material: ABS UL94-HB.
5. External power supply (battery charger): Input: 100 to 240 VAC. Output: 15 VDC, 1A.
6. Dimensions: 330x160x40 mm3.
7. TAG compatibility: T-BT 7700; T-BT 7711; T-BT 7720; T-BT 7755; T-BH 7550; T-IA 7711
Datamars Low Frequency Single Read transponder only
8. Transmission frequency: 110 KHz.
9. Battery life: >500 cycles.
10. Weight: 450g (TBD).
11. IP40 (protection against dust, no protection for liquid).
12. Interfaces to host PC: USB and BLUETOOTH.
R-PO7470 Manual – v. 1.1 – August 2008 22