User's Manual

TracKing-1 Manual – v. 1.0 December 2013 8
4 Connect your TracKing-1 to a PC
4.1 Introduction
There are two principally reasons to connect your TracKing-1 reader to a PC. Once is to recharge your
TracKing-1 reader and the other is to communicate with him. You have three possibility to communicate with
the USB port, two are real time and the last one show the memory of the reader:
 USB Mass Storage (MS)
 USB Virtual Com Port (VCP)
 USB Keyboard Wedge (KW)
4.2 USB Mass Storage
With this function you are able to connect the reader to the PC in order to have it same as a USB storage
pen.
Always when you connect the reader to the PC, the battery will be go in charging mode, but in this state, you
cannot use the reader for reading sessions.
4.3 USB Virtual Com Port
This function allows communicating with the PC as with a serial cable, but you do not need a RS232 serial
cable.
Also with this functionality when connected to the PC will be charging the battery of the reader, with the
difference respect the USB Mass Storage you can use the reader also for reading sessions.
4.4 USB Keyboard Wedge
This function allows using the reader as a keyboard, in order to print in your database the UI just read.
Also with this functionality when connected to the PC will be charging the battery of the reader, with the
difference respect the USB Mass Storage you can use the reader also for reading sessions.