User's Manual

XTend Max Reader User Manual – v. 0.2 December 2012 20
11 Bluetooth
In order to use the functionality explained below you have to be sure that your scanner has the
Bluetooth pack. The pack is composed about a physical Bluetooth module into the scanner and
equipped with a dedicated firmware.
11.1 Turn ON Bluetooth module
Press the right Select button in order to open the action menu, move the left Select button as long as
you are with the cursor over the Bluetooth icon. Then On button has to be pressed in order to
activate the Bluetooth module on the scanner. In the bar on top of the reader will be appear the
symbol of the Bluetooth. When the On button are pressed again you turn off the Bluetooth module,
and the icon over the bar disappear.
11.2 Connection condition
At first your PC must to be having a Bluetooth connection, generally all laptops or notepads are
equipped with an internal Bluetooth module. For the workstations, that normally not have a Bluetooth
device, are available USB Bluetooth module, that can you find in all electronic device shop.
Then it is important that the Xtend Max Scanner is ON and the BT module is activated.
11.3 PC Bluetooth module configuration
In this chapter is explained the how you can pair your scanner with a PC in order to establish a
wireless connection between the scanner and the PC.
At first from the control panel choose Bluetooth Device . The following dialog windows will be
appears:
At next select the Option tab, and then check the feature Turn discovery on , as shown in the
following picture: