User's Manual

XTend Max Reader User Manual – v. 0.2 December 2012 22
After the selection of the device you have to be pressed the Next > button, as shown in the following
picture:
Select the option: Let me choose my own passkey and the password is 0. This is for all Datamars
scanners the same, just one 0 characters, and then press the Next > button to continue, as shown in
the following picture:
The connecting window will be appear, sometimes is it possible that this operation do not go at the
first attempt. This is related of the compatibility of the two Bluetooth module, scanner and PC, but
after a second or third try it will be working correctly. In order to start again the pairing press the Start
Again button on the bottom of the windows.
When the procedure is finished your device is recognized and installed in your PC as a Bluetooth
device. In order to end the installation of the Bluetooth device press the Finish button on the bottom
of the window.