User's Manual

XTend Max Reader User Manual – v. 0.2 December 2012 6
2.3 ON button
There is more than one possibility to use the ON button, in fact with him you are able to turn on the
XTend Max scanner, and when the scanner is turned on you have the possibility to start and stop a
reading session. Moreover when you are surfing in the menu the ON button is used to select and
confirm the various available settings, the settings are described in later chapters of this manual.
2.4 SELECT LEFT button
For enter in the settings menu you have to be pressed the SELECT LEFT button. Another
functionality of this button is the navigation into menu.
2.5 SELECT RIGHT button
In order to turn off the scanner you have to pressed the SELECT RIGHT button, but attention this
function can be accessed only when the scanner has displayed the initial screen, and it don’t is in the
reading mode. In the settings menu you can also use this button only for two modes. The first is in
order to change the value of a setting, and the second is for exit from menu.
2.6 STICK button
The STICK button has only two functions, you have to be pressed this button in order to turn on the
scanner, or for start a reading session.