Manualshelf

User's Manual

ManualsBrandsDatamatic ManualsElectronicsWater Meter Transmitter
123456789
RouteSTAR FIREFLY Chapter 2: Installation
Version 2.3 © Datamatic.com, Ltd. 2000 - 2002 7
Installing the Electric FIREFLY:
1.
Remove nameplate.
2.
Position the unit on top of the nameplate posts.
3.
Mount the unit flush on top of the nameplate posts with the spacer and nameplate above it.
4.
Thread the mounting screw through the nameplate, the 0.25 inch spacer (See illustration
below) and FIREFLY into the nameplate post holes.
5.
Adjust play in mounting holes so that FIREFLY is parallel with disk and the distance
between sensor face and disk is between 0.070 and 0.110 inches.