User's Manual

DRAFT
Chapter 1: System Overview 27
DRAFT
©
Datamatic, Ltd. 2000 - 2005
Selecting “Y” will cause the profile extraction process to request all available profile data
bins. Selecting “N” will cause the user to re-enter the number of days available. The
default is “N” if the user selects the escape key sequence.
When the extraction is done, the user will be alerted by an audible beep along with a
message that the extraction has completed successfully.
Once a profile extraction has succeeded, the user is prompted to save configuration
information. This is detailed in the next message.
At the end of the workday, profile data in the ROADRUNNER is uploaded along with
any other meter readings in the normal fashion. Profile data is then viewed on the MVP
PC.
Viewing Profile Data in RouteSTAR MVP
Viewing ProfilePLUS Data via RouteSTAR MVP
! Select the FIREFLY icon from the Detail Summary View (left side) of the Route
Manager View.
Meters with extracted data display in the Detail SummaryArea. (right side) of the
Route Manager view.
! Select a meter number in the Detail SummaryArea.
The number of
days
selected is
greater
than the number
of
days available.
Do you want to
select ALL days?
(Y/N)