User's Manual

DRAFT
Chapter 1: System Overview 19
DRAFT
©
Datamatic, Ltd. 2000 - 2005
Note: When the PPU is not in use, it MUST be switched to the OFF
position, to prolong battery life.
! From the meter record, on the ROADRUNNER 860 press SHIFT I or F5 on the
ROADRUNNER X7 to access the FIREFLY Menu.
Or,
! Press F1 , 4 , then 6 to access the FIREFLY Menu.
! Choose 5 Profile Extract from the FIREFLY Menu.
—FIREFLY Config—
1.Templates
2.Program FF
3.Program Indiv Param
4.Current Settings
5.Profile Extract
5.Profile Extract5.Profile Extract
5.Profile Extract
6.Set Reading Mode
7.Enter AutoCAL
8.Exit AutoCAL
9.Test RF Reception
A.TEST OPTICS
B.Diagnostics
C.Options
D.Captue Config
E.AutoCAL Rules
F.Clr Zero/Sat Evt
The ROADRUNNER extracts the profile data from the MIU.
Receiving Interval
Data
Progress
XX %
Please Standby
The process takes up to 60 seconds with water FIREFLYs and 2 minutes on electric or
gas.