Operator's Manual User Manual

A-Class Mark II 55
System Settings (continued)
Menu Item Details
VOID DISTANCE
Sets the distance to print VOID on a faulted label,
where:
(0.10 to 2.00 in.)
0.50
Is the distance, measured from the trailing edge,
which establishes the text size.
 VOID will not be printed if insufficient text space
exists or if the fault occurred after printing
completed. Also, the text can be customized; see
the Class Series 2 Programmer’s Manual.
RETRY COUNT
Sets the number of printing attempts before declaring
a fault, where:
(0 – 3)
1
Is the count.
 Greater than 1 (one) counts are valid only when
Linear Scanner or RFID equipped.
BACKFEED ON CLEAR
Determines positioning after a fault is cleared, where:
ENABLED Automatically positions the label.
DISABLED No label positioning occurs, as the location is assumed
correct.
 If reloading, you must place media at the SOP
position.
SCL FONT BOLD FACTOR
Sets a scalable font boldfacing amount, where:
(1 – 36)
08
Is the setting, based on an incrementing scale where
eight (08) is nominal.