User Guide Owner manual

7
2 Loading Supplies
2.1 Adding Paper or Labels
The printer can print text, bar codes and graphics on thermal receipt paper. See “Supply
Specifications” for the width, thickness requirements and approved vendors. Follow these
steps to load printer paper.
 Open the paper door by pressing the Paper Door Unlock Button on the top cover as
indicated in Figure 6.
FIGURE 6 – OPENING PAPER DOOR
 Place the paper supply roll into the paper supply well. Make sure the paper supply
unwinds from the bottom as shown in Figure 7.
FIGURE 7 – INSTALLING PAPER ROLL
 Position the paper supply between the print head guides.
 Make sure some supply (2-3 inches) extends beyond the top of the paper supply well.