User Manual

H-Class 51
4.2.4 System Settings
The System Settings menu contains operating, control, and formatting functions:
Menu Item Details
MENU MODE Sets the menu access level, where:
USER MENU
Accesses limited basic menu items.
ADVANCED MENU Accesses all menu items.
CONFIGURATION FILE
Controls the creation, storage, and recall of printer
configuration files (see Appendix E), where:
RESTORE AS CURRENT
Lists the files available and then, after selection,
reconfigures the printer according to that file.
SAVE SETTING AS
Saves the effective printer configuration to a named
file of up to nineteen characters.
DELETE FILE
Lists the files available and then after selection,
removes that file from memory.
 An active file cannot be deleted.
FACTORY SETTING FILE
Lists the files available, and then after selection, that
file will be restored whenever a Level One reset is
performed; see Section 5.3.2.
INTERNAL MODULE
Allocates a number of 1KB memory blocks to the
internal memory module; where:
(XXX – XXXX KB)
1024
Is the memory allocation; see Appendix A.
DEFAULT MODULE
Designates the storage module when no memory
location is specified; where:
G
D
Is the module; see Appendix A for availability.
SCALEABLE FONT CACHE
Configures the number of 1KB memory blocks for the
scalable font engine; where:
(XXX – XXXX KB)
0511
Is the memory allocation; see Appendix A for
availability.
SINGLE BYTE SYMBOLS
Sets the code page used for single byte fonts, where:
PC▪850 MULTILINGUAL Is the selected code page. (See the Class Series 2
Programmer’s Manual for a complete listing.)