Manual

Removing the Strap

1. Push in the locking keys on the printer's snaps

(Figure 1) and detach the strap.

Installing the Shoulder Strap

1. Insert the strap's clips into the printer's snaps so

that they click into place (Figure 2). Use the

following guidelines:

• The lettering on the strap's clips face down.

• The locking keys on the printer's snaps align

with the notches on the strap's clips.

The locking keys should easily snap into place. Do

not force the strap into place.

Note: The shoulder strap included in this kit is not

adjustable and does not have a gripped handle.

Figure 1

Locking key

Snap

Figure 2

Snap

Clip

210241-000 LP3 Shoulder Strap

Parts List

• 210241-000 Should Strap

PAGE 1
210241-000 LP3 Shoulder Strap Removing the Strap 1. Push in the locking keys on the printer's snaps (Figure 1) and detach the strap. Locking key Snap Figure 1 Installing the Shoulder Strap Parts List • 210241-000 Should Strap Note: The shoulder strap included in this kit is not adjustable and does not have a gripped handle. 1. Insert the strap's clips into the printer's snaps so that they click into place (Figure 2). Use the following guidelines: • The lettering on the strap's clips face down.
PAGE 2
Warranty The Company warrants that Datamax-O’Neil products are free from defects in manufacturing materials and workmanship for one (1) year from date of original purchase to Buyer/Distributor (OEMs 90 days from the date of purchase). Batteries, cables, power supplies, and other accessories will be warranted for ninety (90) days. Datamax-O’Neil makes no other warranties, expressed or implied, including implied warranties of merchantability and fitness of purpose.