User guide

Printer’s Internal Web Pages 10

WIRED ETHERNET CONFIGURATION Page

DHCP

ENABLED/DISABLED

Controls IP Address discovery, where:

ENABLED: Broadcasts over the network to receive addresses from the responsible

server at startup. Manual modifications to IP Address, Subnet Mask, or Gateway are not

allowed; and, if no server is found, the specified static value will be used.

DISABLED: Uses the stored static IP, Subnet Mask, and / or Gateway Address.

STATIC IP ADDRESSES

PRINTER IP ADDRESS

PRINTER SUBNET MASK

PRINTER GATEWAY

These are the static address the printer will use when “DHCP” is set to disabled or a valid

IP could not be retrieved from a DHCP server.

ETHERNET PORT

CONNECTION SETTINGS

ETHERNET MODE Allows the User to specify the line duplex and speed of the wired Ethernet connection.

Auto-Negotiate (default) 10 BaseT Full Duplex

100 BaseT Full Duplex 10 BaseT Half Duplex

100 BaseT Half Duplex

ADVERTISE CAPABILITIES

Selects the method in which the Duplex Capability setting is advertised, where:

Automatic (advertises the selected Duplex Capability setting)

All Capabilities (advertises all capabilities)

MINIMUM TRANSMISSION

UNIT (MTU)

Max Transmission Units Sets the Maximum Transmission Unit packet size, where:

Packet size, in bytes. (512-65515); Default is 1500

DMXrfNet3 Page