Owner manual

5
G) Slide the Main Logic Card
into the Card Cage and
replace the Fill Plate. Secure
the Main Logic Card and the
Fill Plate using the previously
removed Screws. Reconnect
all the cables to the Main
Logic Card.
J11
J9
J14
J10
J8
J12
J6
J5
J4
J16
J7
Main Logic Card
H) Remove the Ground Strap
Screw and Lock Washer,
four Power Supply Screws,
and two Line Filter Screws.
Remove the Line Filter
Bracket and then remove the
Power Supply.
Power Supply
Screws
Ground Strap
Screw and Lock Washer
Power Supply
Line Filter
Bracket
Line Filter
Screws
I) Place the Media Hub
Assembly*(Item 1) into the
Hub Mount. Secure the
Shaft to Hub Mount using
the Screw (Item 2), ensuring
that both are completely
tightened before proceeding.
Media Hub Assembly
Screw
Shaft
Hub Mount
* 3-Inch Media Hub Kit installers – see the note at the end of this document.