User Guide Manual

MICROFLASH 4T PRINTER USER'S GUIDE
8
Using 802.11b/Bluetooth
Radio printers are configured with default factory
settings. To determine your printer's radio
configuration, print a self-test. (For more information,
see
Printing a Self-Test on page 7 .) If you have multiple
printers, configure them specifically for use in your
environment.
For proper system operation, set the following
parameters on your printer and host computer:
802.11b Parameters
 ESS ID
 IP Address (if not DHCP)
 DHCP
 Sub Net Mask
 WEP Encryption
 Port
 Network Type
Bluetooth Parameters
 Device Name
 Authentication
 Bondable
 Discoverable
 Connectable
 Encryption
For information on setting parameters, see Configuring
the Printer on page 7
. Contact your network
administrator to verify the proper radio settings for your
environment.
Note: The following information applies to printers
with 802.11b/Bluetooth capabilities.