Manual

DC Power Extension Cable
110206-001
Installation of DC Power Extension Cable
Procedure
1. Open the latch on the bottom of the printer’s cover. See Photo 1.
2. Insert the right angle cable (210247-100) into the printer’s power port. See Photo 2.
3. Lead the cable down through the cable opening located on the outside of the printer’s case. See Photo 3.
4. With the cable exiting the bottom front of the printer case, close and latch the printer’s cover. Please be sure
not to close the printer cover on the cable as it will damage it. See Photo 4.
Photo 1 Photo 2
Photo 3
Photo 4