Programmer's Manual Owner manual

DTPL Programmer’s Manual 9
DTPL Print Commands
5.0 Introduction
The following table lists the printer’s various print commands.
Command Format Description
Print / Cut Ticket <p> The printer will cut the ticket after printing if it has a cutter.
Print / No Cut Ticket <q> The printer will not cut the ticket after printing even if it has a cutter.
Print Ticket And Eject <z> The printer will eject the ticket after the ticket is cut.
Print / Cut (Hold Ticket
Image)
<h> Allows the user to update a number of fields on the ticket without re-transmitting all of
the data. When this command is used, the printer will hold the print image in memory.
Only text and bar codes can be updated on a 'held' ticket.
Print / No Cut (Hold
Ticket Image)
<r> The ticket is not cut until a normal print command (<p> or FF) is sent.