User's Manual

S ETTING U P Y OUR P RINTER
13
Printing a Self-Test
1. Press and hold the power button for approximately three (3)
seconds until printing begins. For information on button
functions, see
Using the Control Panel on page 17 .
2. After printing begins, release the power button.
Connecting the Printer
The OC-2 printer is designed to transmit and receive data from
a host terminal. The host terminal may be your computer,
handheld, or laptop. Communication can occur using one of the
following methods:
• Using a data cable to connect the printer and the host
terminal (
this page ), or
Installing a Data Cable
1. Before connecting your printer to a host terminal, verify your
printer's settings. For more information, see
Printing a Self-
Test on page 13
.
2. Turn off the printer.
3. Insert the data cable's plug into your printer's data port
(Figure 29).
4. Connect the data cable to the host and/or device you are
using.
Figure X
Data port
LP3.book Page 13 Wednesday, April 12, 2006 4:41 PM