User's Manual

U SING THE C ONTROL P ANEL
17
Using the Control Panel
The tables on the following pages document the following:
• Audio Indicators on page 17
• Battery Status LED on page 18
• Power Button/LED on page 19
• Media Function Button/LED on page 19
• Radio Button/LED on page 20
• Reset Button/LED on page 20
Audio Indicators
Beep(s) Description Action
1 short Printer wakes up. None.
2 short Out of paper. Install paper.
3 short Low battery. Charge battery.
1 very short RF power is on.
Note: This beep occurs when
you press the RF power button
and the RF power was off.
None.
2 very short RF power is off.
Note: This beep occurs when
you press the RF power button
and the RF power was on.
None.
1 long Boot code is starting or
restarting.
Redownload firmware.
5 short Error writing comm controller
firmware from application.
Redownload comm
controller after printer
resets.
8 short CRC error in firmware. Redownload firmware.
10 short Error writing communication
controller firmware from boot
code.
Redownload firmware.
Media Function
Button/LED
Radio
Button/LED
Power Button/
LED
Battery Status
LED
Reset
Button
LP3.book Page 17 Wednesday, April 12, 2006 4:41 PM