User's Manual

OC-2 SERIES OF PRINTERS USER'S GUIDE
8
Setting Up Your Printer
Use the following information to set up your printer:
• Unpacking Your Printer on page 8
• Installing Batteries on page 8
• Loading Printable Media on page 11
• Printing a Self-Test on page 13
• Connecting the Printer on page 13
• Configuring the Printer on page 15
In addition to the steps outlined in each section, additional
information may be included if it applies to, or expands upon,
the step being discussed.
Unpacking Your Printer
Before using the printer, remove all packaging material and
inspect the printer for possible shipping damage.
If the printer has been damaged:
• Contact the shipping company and file a damage report.
• Contact O’Neil Product Development, Inc.
• Keep all shipping materials.
Installing Batteries
1. Remove any packaging material (if applicable).
2. Position the battery with its contacts facing toward the
battery cavity as shown in Figure X.
Figure X
Figure X
LP3.book Page 8 Wednesday, April 12, 2006 4:41 PM