User's Manual

OC-2 SERIES OF PRINTERS USER'S GUIDE
10
3. Plug the AC Adapter's power cord into an appropriate
power source.
4. Charge the batteries. The Battery Status LED turns red
while the batteries are charging and turns green when the
batteries are fully charged. One complete charge takes
4 to 5 hours.
Determining the Batteries' Condition
The battery status LED displays the batteries' condition. When
the battery status LED is solid red, the batteries must be
charged; when solid orange, the batteries are at low power;
when solid green, the batteries are charged.
The batteries'
voltage varies between 6.2 and 8.4 volts.
For information on battery error conditions, see
Using the
Control Panel on page 17
.
Power port
Figure X
Figure X
LP3.book Page 10 Wednesday, April 12, 2006 4:41 PM