User's Manual

OC-2 SERIES OF PRINTERS USER'S GUIDE
12
6. Close the printer's printhead cover. The printer's printhead
cover “snaps” into place when completely closed.
7. Verify the media exits straight.
8. Push the Media Function button one time to advance the
media (Figure X).
9. At either edge of the printer's printhead cover are serrated
corners. Tear the media by pulling up and away from the
printer's (Figure X).
Warning: The tear bar and printhead cover's surface may be
hot and/or sharp. Use caution when handling the printhead
and tear bar.
Figure X
Figure X
Figure X
Figure X
Figure X
LP3.book Page 12 Wednesday, April 12, 2006 4:41 PM