User Manual

5. Getting Started
5.3.1 Inserting Media MP Nova4 & 6
Note:
The pictures shown describe an
MP Nova4 DT. The process
works just the same for MP
Nova6 DT and MP Nova4 & 6
TT.
1. Undo the roll guide lock.
2. Remove the roll guide from
the media shaft.
3. Pull handle to lift the print
head from the roller.
4. Position a new media roll
onto the spool and insert the
media from the side into the
printer’s media track.
5. Check that the media is
aligned with the internal
printer wall.
! Make sure the outer roll guide
suits the width of the media. If
necessary, open the cover and
adjust the outer roll guide. (Only
necessary when changing
media type.)
6. Put the roll guide on the
unroll shaft. Push it against
the roll for optimum control.