User Manual
Table Of Contents
- 00_0-MP Nova4 cover.doc
- 00_1 UserGuide_Table-of-contents.doc
- 01_1-Introduction.doc
- 02_1-Safety.doc
- 03_1-Product presentation.doc
- 04_1-Product overview_In the box.doc
- 04_2-Product overview_Printer partsDT.doc
- 04_3-Product overview_open_closeDT.doc
- 04_4-Product overview_Printer partsTT.doc
- 04_5-Product overview_open_closeTT.doc
- 5-6.pdf
- 05_1-Getting started_overwiew_.doc
- 05_2-Getting started peel-off_overwiew_.doc
- 05_3_1-Getting started_inserting media.doc
- 05_3_2_1-Getting started_adjusting_steering.doc
- 05_3_2_2-Getting started_inserting media_N8.doc
- 05_4-Getting started-inserting-media-peel-off kit.doc
- 05_5-Getting started_inserting ink ribbon.doc
- 05_6-Getting started_connecting.doc
- 05_7-Getting started_test print.doc
- 06_1-Operation_tearing media_.doc
- 06_2-Operation_interpreting the lamp.doc
- 06_3-Adjusting_MPS.doc
- 06_4-Adjusting_Print_Head.doc
- 7-all.pdf
- 07_1-Maintenance_cleaning print head and roller.doc
- 08_1-Troubleshooting.doc
- 09_1-Changable parts_roller.doc
- 09_2-Changable parts_print head.doc
- 10_1-Printer Options_peel-off kit_.doc
- 10_2-Printer Options_consumable_.doc
- 11_1-Consumables_media.doc
- 12_1-Technical specifications.doc
- 12_2-Technical specifications.doc
- 12_3-Technical specifications.doc

5. Getting Started
5.3.2 Inserting Media MP Nova8 DT
3. Pull out some of the media.
4. Fold the handle (the print
head folds automatically
onto the roller).
5. Press the print button a few
times until the printer
automatically finds the
correct position of the media.
Note:
If necessary, make a test
printout and auto adjust the
media positioning sensor as
described in chapter 5.7.










