User Manual

6. Operation
6.3 Media Positioning Sensor Settings
Sensor mode Approximate sensor reading
point, from edge of media.
1. Outer (default) 16 mm
2. Inner 5 mm
3. Black mark 5 mm
The MP Nova printers are equipped
with media positioning sensors
(MPS). The MPS detects the media
and can be set to three different
modes depending on how and where
gaps and marks are positioned on the
media:
1. Outer sensor mode – detects label
gaps about 16 mm from the edge
of the media.
Note: This is the default setting.
2. Inner sensor mode – detects label
gaps about 5 mm from the edge of
the media.
3. Black mark sensor – detects black
marks on the reverse side of the
media, about 5 mm from the edge
of the media.
4. To change the settings, see the
Printer settings menu on the
Getting started CD.
Note: Changes in the printer
settings should be made by
qualified personnel.
For more information about ticket, tag
and label specifications, see the
Media specification sheet.